Employment
Health & Safety
Workplace safety policies, COSHH assessments, risk assessments, and safety documentation. Free templates — download PDF or Word, no signup required (2026).
Workplace Accident and Injury Report Form (Australia)
An Australian Workplace Accident and Injury Report Form is a structured document used to record full details of a workplace accident, the injury or illness sustained by the worker, the hazards and causes that led to the accident, and the corrective actions and return to work steps to be implemented. It is required under Australian work health and safety legislation and state workers compensation legislation and is a fundamental document in both the workers compensation claims process and the workplace injury investigation process. The obligation to report workplace accidents and injuries in Australia arises from two separate legislative frameworks. First, under the Work Health and Safety Act 2011 (Cth) (WHS Act) and its state and territory equivalents, the person conducting a business or undertaking (PCBU) must immediately notify the WHS regulator of any notifiable incident — defined as the death of a person, a serious injury or illness (as defined in WHS Act s 36), or a dangerous incident (as defined in WHS Act s 37). The definition of serious injury or illness in s 36 includes injuries requiring immediate in-patient hospital treatment, amputations, fractures of the skull, spine, or pelvis, serious head or eye injuries, burns requiring hospitalisation, loss of body function, and certain occupational diseases. Second, under state and territory workers compensation legislation, the employer must separately notify their workers compensation insurer of any work-related injury or illness. The relevant legislation includes the Workers Compensation Act 1987 (NSW), the Workplace Injury Rehabilitation and Compensation Act 2013 (Vic), the Workers' Compensation and Rehabilitation Act 2003 (Qld), the Workers' Compensation and Injury Management Act 1981 (WA), the Return to Work Act 2014 (SA), the Workers Rehabilitation and Compensation Act 1988 (Tas), the Workers Compensation Act 1951 (ACT), and the Return to Work Act 1986 (NT). Notification timeframes vary by jurisdiction — in NSW, serious injuries must be notified within 48 hours and other injuries within five days; similar requirements apply in other states. Australia's workers compensation system is administered on a state-by-state basis (except for Commonwealth employees covered by the Safety, Rehabilitation and Compensation Act 1988 (Cth)), and the claims process, benefits, and return to work obligations differ between jurisdictions. In most jurisdictions, the employer is also required to appoint a return to work coordinator for injured workers, develop a return to work plan, and maintain the worker's employment during recovery to the extent practicable. Effective accident investigation is required by WHS Regulation 2017 (Cth) Part 3.1, which obligates the PCBU to identify hazards, assess risks, and implement controls using the hierarchy of controls: elimination, substitution, isolation, engineering controls, administrative controls, and personal protective equipment. The investigation must identify contributing factors at the immediate, underlying (systemic), and root cause levels to ensure that corrective actions address the actual causes of the accident — not just the visible immediate cause — and are effective in preventing recurrence. Musculoskeletal disorders (particularly back and shoulder injuries from hazardous manual tasks) are among the most common causes of workplace injury in Australia. The Code of Practice — Hazardous Manual Tasks (published by Safe Work Australia) provides guidance on identifying and controlling hazardous manual task risks in accordance with WHS Regulation 2017 regs 59-64, which specifically address hazardous manual tasks as a risk requiring risk assessment and control by the PCBU. This Workplace Accident and Injury Report Form covers all key elements of an accident report, including employer and workplace details, full injured worker details and employment type, detailed accident description, injury details and medical treatment, workers compensation insurer notification, WHS regulator notification for notifiable injuries, hazard identification and cause analysis, corrective actions using the hierarchy of controls, return to work planning, and sign-off by both the reporting supervisor and approving manager.
Workplace Incident Report Form (Australia)
An Australian Workplace Incident Report Form is a structured document used to record the details of a workplace incident, including accidents, injuries, illnesses, dangerous incidents, and near misses. It is an essential component of a workplace's work health and safety (WHS) management system and is required under Australian WHS legislation for the investigation of workplace hazards and the notification of notifiable incidents to WHS regulators. The primary legislative obligation to report and investigate workplace incidents arises from the Work Health and Safety Act 2011 (Cth) (WHS Act) and its state and territory equivalents. Under s 38 of the WHS Act, the person conducting a business or undertaking (PCBU) must notify the WHS regulator immediately — by the fastest possible means — after becoming aware that a notifiable incident arising from the conduct of the business or undertaking has occurred at a workplace. A notifiable incident is defined in the WHS Act as: (a) the death of a person; (b) a serious injury or illness of a person (as defined in s 36, which includes injuries requiring immediate in-patient hospital treatment, amputations, serious head and eye injuries, burns, certain diseases, and other serious harm); or (c) a dangerous incident (as defined in s 37, which includes incidents involving uncontrolled explosions, fires, escapes of hazardous substances, and structural collapses). Under WHS Act s 39, the PCBU must ensure that the site of a notifiable incident is not disturbed until an inspector arrives or the WHS regulator gives permission, except to the extent necessary to assist injured persons, remove a deceased person, prevent a further incident, or as required by another law. The PCBU must also keep a record of each notifiable incident for at least five years from the day the regulator is notified, as required by WHS Regulation 2017 (Cth) reg 693. Beyond notifiable incidents, best practice WHS management — consistent with Part 3.1 of the WHS Regulation — requires the PCBU to identify hazards, assess risks, and implement controls using the hierarchy of controls for all workplace incidents and near misses, not just notifiable ones. A near miss investigation may reveal systemic failures that could result in a serious injury or death if not corrected, and the WHS Regulation's risk management obligations apply to all workplace hazards regardless of whether an injury has occurred. State and territory workers compensation legislation also imposes reporting obligations on employers when a worker sustains a work-related injury or illness. Under the Workers Compensation Act 1987 (NSW), the Accident Compensation Act 1985 (Vic), the Workers' Compensation and Injury Management Act 1981 (WA), the Workers' Compensation and Rehabilitation Act 2003 (Qld), and equivalent legislation in other states and territories, employers must notify their workers compensation insurer of a work-related injury within a prescribed timeframe (typically 48 hours for serious injuries and five days for other injuries, depending on the jurisdiction). A completed incident report form is a key document in the workers compensation claims process. Effective incident investigation requires identification of contributing factors at multiple levels: the immediate (direct) causes — the physical events or conditions that directly caused the harm; the underlying (systemic) causes — the failures in systems, processes, supervision, training, or equipment; and the root causes — the fundamental organisational or management failures that allowed the other causes to develop. This multi-level analysis is essential for identifying corrective actions that will be effective in preventing recurrence, as opposed to focusing only on the visible, immediate cause. This Workplace Incident Report Form template covers all key elements required for an effective incident report, including full details of the incident, the persons involved and their employment status, the nature of injury or harm, witness details, notifiable incident assessment and regulator notification records, immediate actions taken, contributing factor and root cause analysis, corrective actions prioritised using the hierarchy of controls, and management sign-off. It is suitable for use by employers and PCBUs across all industries in all Australian states and territories.
Manual Task Risk Assessment (Australia)
An Australian Manual Task Risk Assessment is a systematic document used to identify the hazardous manual task risk factors present in a specific work task, evaluate the level of risk of musculoskeletal disorder, and determine the control measures required to eliminate or minimise that risk. It is required by Australian work health and safety legislation and is a key tool for protecting workers from one of the most common causes of workplace injury in Australia. Manual handling injuries — particularly musculoskeletal disorders (MSDs) affecting the back, shoulder, neck, and upper limbs — are consistently among the most common and costly workplace injuries in Australia. Safe Work Australia data shows that manual handling is a leading mechanism of workplace injury, accounting for a substantial proportion of all serious workers' compensation claims each year. This makes systematic identification and control of hazardous manual tasks a high-priority WHS obligation for all employers. The legislative framework governing hazardous manual tasks in Australia is primarily established by regulations 60 to 68 of the Work Health and Safety Regulation 2017 (Cth) (WHS Regulation), made under the Work Health and Safety Act 2011 (Cth) (WHS Act). Regulation 60 defines a 'hazardous manual task' as a task that requires a person to use force exerted by a person, repetitive or sustained force, high or sudden force, repetitive movement, sustained or awkward posture, or exposure to vibration. Under reg 61 of the WHS Regulation, the person conducting a business or undertaking (PCBU) must identify the risk factors for musculoskeletal disorder associated with each hazardous manual task performed by a worker. Under reg 62, the PCBU must eliminate the risk of musculoskeletal disorder if reasonably practicable; if elimination is not reasonably practicable, the PCBU must minimise the risk so far as is reasonably practicable by implementing controls using the hierarchy of controls: elimination, substitution, isolation, engineering controls, administrative controls, and personal protective equipment. Regulation 65 requires the PCBU to review and revise risk control measures when the risk may have changed or when controls are not effective. The Safe Work Australia Code of Practice: Hazardous Manual Tasks (the Code) is approved under s 274 of the WHS Act and provides detailed practical guidance on identifying, assessing, and controlling hazardous manual task risks. The Code is admissible in WHS proceedings as evidence of what is known about hazards or risks and standards of risk management. Following the Code is the most straightforward way for a PCBU to demonstrate compliance with the WHS Regulation requirements for hazardous manual tasks. The Code identifies the key biomechanical risk factors associated with musculoskeletal disorder: forceful exertions (lifting, pushing, pulling, carrying heavy loads); repetitive or sustained movements (repeated actions, prolonged sustained postures); awkward or sustained postures (bending, twisting, reaching, overhead work, kneeling); vibration (whole-body vibration from vehicles, hand-arm vibration from power tools); and the physical characteristics of objects handled (heavy, large, unstable, difficult to grip). The presence of multiple risk factors significantly increases the probability of musculoskeletal injury. The Code also emphasises the importance of consulting workers when identifying hazards and developing control measures. Workers who perform the task often have valuable practical knowledge about the physical demands and risk factors involved, and their input is essential for developing effective and workable controls. Consultation is also a legal obligation under Part 5 of the WHS Act. Effective control of hazardous manual tasks typically involves a combination of engineering controls (mechanical aids such as hoists, trolleys, pallet jacks, conveyor systems, or height-adjustable workstations), administrative controls (job rotation, task scheduling, limiting duration of high-risk tasks, safe work procedures, training in manual handling techniques, and health monitoring), and personal protective equipment (safety footwear, gloves) as a supplementary measure. This Manual Task Risk Assessment template covers all requirements of regs 60–68 of the WHS Regulation 2017 (Cth) and the Safe Work Australia Code of Practice: Hazardous Manual Tasks, including task description, identification of all five categories of manual task risk factors, assessment of existing controls, overall risk rating, injury history, control measures across the full hierarchy, an action plan with responsibilities and timeframes, worker consultation, and sign-off. It is suitable for all industries and workplaces across Australia.
Safe Work Method Statement — SWMS (Australia)
A Safe Work Method Statement (SWMS) is a legally required document for high risk construction work (HRCW) in Australia. It identifies the HRCW to be performed, specifies the hazards and risks associated with that work, and describes the measures to be implemented to control those risks and how the controls will be implemented, monitored, and reviewed. A SWMS is mandatory under Chapter 6 Part 2 of the Work Health and Safety Regulation 2017 (Cth) (WHS Regulation) and must be prepared before any HRCW commences. Under WHS Regulation reg 291, a person conducting a business or undertaking (PCBU) who carries out or directs high risk construction work must ensure that a SWMS is prepared before the HRCW commences, is prepared in consultation with the workers who are to carry out the HRCW, and is reviewed and if necessary revised if there is a change that may affect the way the HRCW is carried out. The SWMS must identify the work that is HRCW; specify the hazards and associated risks; describe the measures to be implemented to control the risks; and describe how the control measures are to be implemented, monitored, and reviewed. High risk construction work is defined in Schedule 18 of the WHS Regulation and includes 19 categories of work: (a) work involving a risk of a person falling more than 2 metres; (b) work on a telecommunications tower; (c) demolition of a load-bearing element or structural demolition; (d) work involving disturbance or removal of asbestos; (e) work involving structural alterations requiring temporary support of load-bearing elements; (f) work in or adjacent to a roadway or railway used by traffic; (g) work in areas with movement of powered mobile plant; (h) work in areas with artificial extremes of temperature; (i) work in or near water or other liquids posing a drowning risk; (j) diving work; (k) work involving explosives; (l) work involving pressurised gas distribution mains or piping; (m) work involving energised electrical installations or services; (n) work in a contaminated or flammable atmosphere; (o) tilt-up or precast concrete work; (p) work on or adjacent to chemical, fuel, or refrigerant pipelines; (q) work in a confined space; (r) work involving a trench or shaft more than 1.5 metres deep; and (s) tunnelling work. Under WHS Regulation reg 292, workers must not begin high risk construction work unless they have been given the opportunity to read and understand the SWMS, any person carrying out the HRCW has been consulted about the SWMS content, and the SWMS is available at the construction site at all times while the HRCW is being carried out. The SWMS must be kept at the site and available for inspection by any WHS inspector under reg 291(5). The principal contractor for a construction project has a specific duty under WHS Regulation reg 309 to take all reasonable steps to obtain a copy of any SWMS prepared by a subcontractor, and to ensure that any HRCW on the project is carried out in accordance with a SWMS. The principal contractor must also ensure that a written construction induction card (CIC) is required of all workers before they enter the site, under WHS Regulation reg 317. Control measures in a SWMS must be structured in accordance with the WHS hierarchy of controls (WHS Act 2011 ss 17-19; WHS Regulation regs 34-38): elimination, substitution, isolation, engineering controls, administrative controls, and PPE. For work involving a risk of falling more than 2 metres (the most common HRCW category), Safe Work Australia's Code of Practice — Managing the Risk of Falls at Workplaces sets out specific guidance on the selection and implementation of fall prevention systems (preferred over fall protection systems), including passive fall prevention systems (edge protection, scaffold platforms, work positioning systems) and fall arrest systems (safety nets, fall arrest harnesses) as lower-order alternatives. Certain HRCW also requires high risk work (HRW) licences under WHS Regulation Chapter 4. Workers performing scaffolding work require a scaffolding licence (SB for basic scaffolding up to 4 m, SI for intermediate scaffolding, or SA for advanced scaffolding); workers performing rigging, dogging, and crane work require corresponding licences. The SWMS should identify the specific licence classes required and confirm that all workers hold the relevant licences before commencing HRCW. This SWMS template covers all key elements required by WHS Regulation reg 291, including project and contractor details, HRCW type identification referencing Schedule 18, worker consultation records, step-by-step description of the work, hazard identification and risk assessment using a risk matrix, control measures structured according to the hierarchy of controls, step-by-step work sequence with hazards and controls for each step, monitoring and supervision arrangements, triggers for SWMS review and revision, principal contractor approval, and a worker sign-on acknowledgement register.
SafeWork Incident Notification (Australia)
Create a Notifiable Incident Notification under the Work Health and Safety Act 2011 (Cth), sections 35-39. Records all mandatory information for notifying SafeWork NSW, WorkSafe Victoria, WHSQ, or other state WHS regulators after a workplace fatality, serious injury, or dangerous incident. Includes scene preservation obligations.
Site Induction Checklist (Australia)
An Australian Site Induction Checklist is a structured document used by principal contractors and persons conducting a business or undertaking (PCBUs) to ensure that all workers, subcontractors, visitors, and delivery personnel entering a worksite have received the information they need to work safely. It records what was communicated, confirms understanding, and creates a legally defensible record of WHS compliance. A site induction is one of the most fundamental workplace health and safety obligations in Australian construction and industrial workplaces. Site inductions are required by multiple provisions of Australian work health and safety legislation. Under s 19 of the Work Health and Safety Act 2011 (Cth), the PCBU must ensure, so far as is reasonably practicable, that the work environment is without risks to health and safety and that workers are provided with the information, training, instruction, and supervision necessary to protect them from risks. Site inductions are a primary mechanism through which this duty is discharged. For construction sites, the WHS Regulation 2017 (Cth) imposes specific additional obligations. Regulation 317 designates the principal contractor as responsible for the health and safety of all persons on the construction site. Regulation 318 requires that a person must not carry out construction work unless they have completed Construction Induction Training — the 'White Card' (formally known as the Construction Induction Training unit CPCCWHS1001). The principal contractor must verify White Card compliance for all workers before they commence construction work. Failure to do so exposes the PCBU to significant regulatory penalties. Regulation 43 of the WHS Regulation 2017 (Cth) requires that the PCBU prepare, implement, and maintain an emergency plan for the workplace. The emergency plan must include emergency procedures (including evacuation procedures, procedures for notifying emergency services, and medical treatment and assistance); testing of the plan; and information, training, and instruction for relevant workers in relation to implementing the plan. Communicating emergency procedures is therefore a mandatory component of any site induction. The Safe Work Australia Code of Practice: Construction Work, approved under s 274 of the WHS Act, provides detailed guidance on managing WHS in construction. The Code recommends that the principal contractor establish and maintain a site induction process covering site rules, site hazards, emergency procedures, WHS rights and obligations, and licence and certification verification. The Code is admissible in WHS proceedings as evidence of what is known about hazards or risks and accepted standards of risk management. Beyond the construction sector, site inductions are also required or strongly recommended in mining and resources, oil and gas, manufacturing, warehousing and logistics, and any workplace where significant hazards exist. The hazard communication component of the induction is particularly important in workplaces involving hazardous chemicals (requiring communication of SDS information), high-risk plant and equipment, working at heights, or confined spaces. A comprehensive site induction should cover: the site layout and access arrangements; site-specific hazards identified through the risk assessment process; mandatory PPE requirements and Australian Standards applicable to each item; site rules including substance policies, speed limits, and reporting obligations; emergency procedures including evacuation routes, assembly points, emergency contacts, and first aid locations; WHS rights and obligations under the WHS Act, including the right to cease unsafe work (s 84) and the right to be represented by a health and safety representative; and licence and certification verification for workers who will perform high-risk work. This Site Induction Checklist template covers all mandatory elements for construction sites under the WHS Regulation 2017 (Cth) and the Safe Work Australia Code of Practice: Construction Work. It is suitable for principal contractors, head contractors, site managers, and WHS officers across all industries and workplaces in Australia.
Toolbox Talk Record (Australia)
An Australian Toolbox Talk Record is a document used to record the content of a toolbox talk — also known as a safety briefing, pre-start meeting, or safety huddle — conducted with workers at a construction site or other workplace. It records the date, attendees, safety topics discussed, issues raised by workers, and actions required, providing a written record of the WHS consultation process required under s 47 of the Work Health and Safety Act 2011 (Cth). Toolbox talks are one of the most practical and effective mechanisms through which persons conducting a business or undertaking (PCBUs) and supervisors discharge their daily consultation obligations under Australian work health and safety law. Unlike formal safety meetings or committee processes, toolbox talks are brief, focused briefings — typically 10 to 20 minutes — conducted at the worksite, usually at the start of a shift or before commencing a specific task. Their purpose is to communicate relevant WHS information to workers in real time and to provide workers with the opportunity to raise hazards and concerns. The legal obligation to conduct regular WHS consultation is established by Part 5 of the Work Health and Safety Act 2011 (Cth). Section 47 requires the PCBU to consult with workers on matters that may affect their health and safety, including when identifying hazards and risks, making decisions about how to eliminate or minimise risks, making decisions about the adequacy of welfare facilities, and making decisions about procedures for monitoring the health of workers or the conditions at the workplace. Section 47 further requires that consultation must involve sharing relevant information with workers, giving workers a reasonable opportunity to express their views and raise issues, and taking those views into account. Toolbox talks are a recognised mechanism for satisfying these requirements. For construction sites in Australia, the Safe Work Australia Code of Practice: Construction Work, approved under s 274 of the WHS Act 2011 (Cth), recommends that principal contractors implement regular toolbox talks as a key element of WHS communication and consultation. The Code notes that toolbox talks are particularly effective for communicating information about site-specific hazards, new or modified work procedures, changes in site conditions, lessons learned from incidents or near misses, seasonal hazards, and upcoming high-risk work. Beyond construction, toolbox talks are widely used and recognised as best practice in mining and resources, manufacturing, logistics and warehousing, agriculture, utilities, and other industries where workers face significant WHS hazards. Industry regulators including SafeWork NSW, WorkSafe Victoria, and SafeWork SA have published guidance recommending regular toolbox talks as part of an effective WHS management system. The topics covered in toolbox talks should be directly relevant to the work being performed and the hazards present on site. Effective topics include: fall prevention and harness inspection for workers at height; correct manual handling techniques and team lift procedures; hazardous chemical handling and SDS requirements; plant and equipment pre-start checks and tag-out procedures; electrical safety around live services; heat and cold stress management during extreme weather; traffic management and pedestrian safety; and incident and near-miss reporting procedures. Documenting toolbox talks through a formal record is essential for demonstrating WHS consultation compliance. In the event of a WHS incident or regulatory investigation, toolbox talk records provide evidence that workers were informed about relevant hazards, that consultation was conducted, and that issues raised by workers were actioned. Regulators including SafeWork NSW and WorkSafe Victoria may request records of WHS consultation as part of an inspection or investigation. This Toolbox Talk Record template covers all elements recommended by the Safe Work Australia Code of Practice: Construction Work and complies with the consultation requirements of s 47 of the WHS Act 2011 (Cth). It includes sections for meeting details, topic and safety content, issues raised by workers, an attendee register, action items with responsible persons and due dates, and presenter sign-off.
WHS Risk Assessment (Australia)
An Australian WHS Risk Assessment is a systematic process for identifying hazards in a workplace, evaluating the likelihood and consequence of harm, and determining and documenting the control measures needed to protect workers and other persons. It is a core requirement of the work health and safety management system for every Australian workplace and is mandated by the Work Health and Safety Act 2011 (Cth) and the Work Health and Safety Regulation 2017 (Cth). The legal obligation to conduct WHS risk assessments arises from the primary duty of care in WHS Act 2011 s 19, which requires the person conducting a business or undertaking (PCBU) to ensure, so far as is reasonably practicable, the health and safety of workers and other persons at the workplace. This broad duty encompasses the identification and management of all reasonably foreseeable hazards. The specific risk management process is set out in WHS Regulation 2017 Part 3.1, which requires the PCBU to: identify reasonably foreseeable hazards (reg 34); eliminate risks so far as is reasonably practicable, or — if elimination is not reasonably practicable — minimise risks so far as is reasonably practicable (reg 35); select and implement control measures using the hierarchy of controls (reg 36); maintain and review control measures (regs 37-38); and identify any duty to consult (WHS Act s 47-49). The hierarchy of controls established by WHS Act ss 17-19 and WHS Regulation regs 34-38 requires the PCBU to work through levels of control in order of decreasing effectiveness and reliability: (1) Elimination — removing the hazard entirely from the workplace is the most effective control and should always be considered first; (2) Substitution — replacing the hazardous thing, substance, or work practice with something less hazardous; (3) Isolation — physically separating workers from the hazard using barriers, enclosures, or remote operation; (4) Engineering controls — modifying equipment, plant, or the work environment to reduce the hazard (guards, ventilation, noise enclosures); (5) Administrative controls — implementing safe work procedures, training, supervision, job rotation, signage, and permits to work; (6) Personal protective equipment (PPE) — provided as a last resort or to supplement higher-order controls, and always provided free of charge to workers under WHS Regulation reg 44. Under WHS Act 2011 s 47, the PCBU must, so far as is reasonably practicable, consult workers who are (or are likely to be) directly affected by a matter relating to work health and safety, including during the hazard identification and risk management process. Health and safety representatives (HSRs) elected under WHS Act Part 5 have specific rights to participate in and be consulted about WHS risk management, including the right to inspect the workplace and review WHS documentation. Failure to consult workers is itself a breach of the WHS Act. Under WHS Act 2011 s 27, officers of the PCBU (directors, senior executives) have a personal positive duty to exercise due diligence to ensure the organisation complies with the WHS Act and Regulation. A documented, regularly reviewed risk assessment is a key mechanism for demonstrating officer due diligence under this provision. Officers can be held personally liable for failures of due diligence, with fines of up to $600,000 for Category 2 offences under the WHS Act. Specific hazard categories have additional WHS Regulation requirements: noise exposure above 85 dB(A) triggers the audiometric testing and hearing protection obligations in WHS Regulation regs 55-60; hazardous chemicals trigger the SDS, labelling, health monitoring, and risk assessment requirements in WHS Regulation Chapter 7; hazardous manual tasks trigger the specific risk assessment obligation in WHS Regulation regs 59-64; and work at heights above 2 metres (in construction) triggers the fall prevention obligations in WHS Regulation Chapter 6. This WHS Risk Assessment template covers all key elements required by the WHS Act and Regulation, including organisation details, assessment scope and methodology, worker consultation records, comprehensive hazard identification across physical, chemical, ergonomic, and psychosocial categories, risk evaluation using a risk matrix, control measures structured according to the full hierarchy of controls, residual risk re-assessment, an implementation plan with priority actions and responsible persons, and sign-off by the assessor and approving manager.
Working at Heights Risk Assessment (Australia)
An Australian Working at Heights Risk Assessment is a formal document used to identify fall hazards associated with work performed at an elevation, assess the risk of a fall event, and determine the control measures required to eliminate or minimise that risk in accordance with the hierarchy of controls. It is a legal requirement under Part 4.4 of Chapter 4 of the Work Health and Safety Regulation 2017 (Cth) for all persons conducting a business or undertaking (PCBUs) where workers perform work involving a risk of falling from one level to another. Falls from height remain the leading cause of workplace fatalities in the Australian construction industry and one of the top causes of serious injury across all industries. Safe Work Australia data shows that falls from height consistently account for approximately 20–30% of all workplace fatalities in Australia each year. The consequences of a fall from a significant height are almost always severe — falls from 3 metres or above are frequently fatal or permanently disabling. This makes systematic identification and control of fall risks a critical WHS priority. The legislative framework governing fall risks in Australia is primarily established by Part 4.4 of Chapter 4 of the Work Health and Safety Regulation 2017 (Cth). Regulation 78 provides that the PCBU must manage the risk of a fall from one level to another or into a hole if a fall is likely to cause injury. Regulation 79 establishes that the PCBU must, so far as is reasonably practicable, ensure that work involving a risk of a fall is done on the ground or on a solid construction (i.e., the fall risk is eliminated entirely). Only if elimination is not reasonably practicable must the PCBU apply fall prevention controls. Regulation 80 establishes the hierarchy of fall prevention controls: first, measures that eliminate the risk of a fall occurring (passive fall prevention — scaffolding, guardrails, edge protection, elevating work platforms); second, work positioning systems (travel restraint, industrial rope access); and third (as a last resort), fall arrest systems (full-body harness and lanyard or self-retracting lifeline connected to a certified anchor point). The use of fall arrest systems as the primary means of fall control is generally not acceptable — they must be supplemented with passive fall prevention measures wherever reasonably practicable. Regulation 291 of the WHS Regulation 2017 (Cth) designates construction work involving a risk of falling more than 2 metres as 'high-risk construction work'. Under reg 299, the principal contractor must ensure that a Safe Work Method Statement (SWMS) is prepared before high-risk construction work commences, and that workers are briefed on the SWMS. The working at heights risk assessment is a critical foundation document that informs the content of the SWMS. Fall prevention equipment used on Australian construction sites must comply with applicable Australian Standards: AS/NZS 1891.1:2007 (industrial fall-arrest systems — harnesses and ancillary equipment, including energy-absorbing lanyards and self-retracting lifelines); AS/NZS 1891.4:2009 (industrial fall-arrest systems — selection, use, and maintenance — specifying anchor point requirements, including a minimum capacity of 15 kN); and AS/NZS 4994.1:2009 (temporary edge protection — general requirements for guardrail systems). Anchor points used for fall arrest must be designed, installed, and certified by a competent person (typically a structural engineer). A critically important element of any working at heights plan is the rescue procedure for a worker who falls and is suspended in a harness. Harness suspension trauma (also known as suspension syndrome or orthostatic intolerance) can cause loss of consciousness within 5–15 minutes of suspension, and can be fatal within minutes in some cases. Every working at heights plan must include a specific, practical rescue procedure that can be executed quickly without creating additional casualties. This Working at Heights Risk Assessment template covers all requirements of Part 4.4 of the WHS Regulation 2017 (Cth) and the Safe Work Australia Code of Practice: Managing the Risk of Falls at Workplaces. It addresses the full hierarchy of fall prevention controls from elimination through to fall arrest, includes equipment inspection and anchor point certification requirements, addresses the mandatory rescue plan, and provides comprehensive documentation of the fall hazard identification and risk assessment process.
Workplace Risk Prevention Protocol Chile (Protocolo de Prevención de Riesgos)
A Workplace Risk Prevention Protocol (Protocolo de Prevención de Riesgos) for Chile — governed by Ley 16.744/1968 Art. 67, DS 40/1969, and DS 594/1999, establishing systematic procedures for identifying, evaluating, and controlling occupational hazards in Chilean workplaces with ACHS, IST, or Mutual de Seguridad support.
Workplace Hygiene and Safety Regulations Chile (Reglamento Interno de Higiene y Seguridad)
A Workplace Hygiene and Safety Regulations document (Reglamento Interno de Higiene y Seguridad) for Chile — mandatory for all companies with 10 or more workers under Ley 16.744/1968 Art. 67 and DS 40/1969, establishing occupational safety rules, worker obligations, EPP requirements, and disciplinary procedures consistent with Código del Trabajo Art. 153.
ARL Certificate of No Workplace Accidents Colombia
An ARL Certificate of No Workplace Accidents for Colombia governed by Ley 1562 de 2012, Decreto 1072 de 2015 (SG-SST), and Resolución 0312 de 2019, certifying that the employer has no reported workplace accidents during a specified period, required for public procurement bids, insurance renewals, and SG-SST compliance audits.
Workplace Emergency Action Plan Colombia (Plan de Emergencia Empresa)
A Workplace Emergency Action Plan (Plan de Emergencia Empresa) for Colombia governed by Decreto 1072 de 2015 and Resolución 0312 de 2019 issued by the Ministerio del Trabajo, establishing protocols for natural disasters, fire evacuation, medical emergencies, and chemical spills within the Sistema de Gestión de Seguridad y Salud en el Trabajo (SG-SST) framework.
Return to Work Plan After Accident Colombia (Plan de Retorno al Trabajo)
A Return to Work Plan after workplace accident for Colombia governed by Decreto 1072 de 2015 (SG-SST), Ley 1562 de 2012, and Resolución 0312 de 2019, documenting graduated reintegration, medical restrictions, ARL coordination, job role adaptation, and employer rehabilitation obligations for injured Colombian workers.
Occupational Health and Safety Management Program Colombia (SG-SST)
SG-SST occupational health and safety management program for Colombia required by Decreto 1072 de 2015 and Resolución 0312 de 2019, covering hazard identification, risk control, and compliance with Ministerio del Trabajo standards.
Workplace Accident Report Colombia (FURAT — Informe del Accidente de Trabajo)
Official FURAT workplace accident report for Colombia required by Decreto 1072 de 2015 and Resolución 0312 de 2019, documenting work accidents for ARL reporting, causal investigation, and SG-SST corrective action tracking.
Workplace Risk Assessment APV Template Denmark
APV-skabelon til kortlægning af fysiske og psykiske arbejdsmiljøforhold med prioriteret handlingsplan. Opfylder arbejdsmiljøloven (LBK nr. 1108/2025) og Arbejdstilsynets krav til alle virksomheder med ansatte.
Workplace Accident Report Spain (Acta de Accidente Laboral)
A Workplace Accident Report (Acta de Accidente Laboral) for Spain — governed by Ley 31/1995 de Prevención de Riesgos Laborales art. 23, documenting occupational accidents for notification to the Ministerio de Trabajo and the Inspección de Trabajo y Seguridad Social.
Workplace Risk Assessment Spain (Evaluación de Riesgos Laborales)
A Workplace Risk Assessment (Evaluación de Riesgos Laborales) for Spain — governed by Ley 31/1995, de 8 de noviembre, de Prevención de Riesgos Laborales (LPRL), Article 16.2, establishing the employer's mandatory obligation to identify, evaluate, and control occupational risks for all workers in Spanish workplaces.
Emergency Action Plan Spain (Plan de Emergencia)
An Emergency Action Plan (Plan de Emergencia) for Spain — governed by the Ley de Prevención de Riesgos Laborales (LPRL), Ley 31/1995, Article 20, requiring employers to establish emergency procedures for first aid, fire fighting, worker evacuation, and serious and imminent risk management at every workplace in Spain.
Risk Prevention Plan Spain (Plan de Prevención de Riesgos Laborales)
A Risk Prevention Plan (Plan de Prevención de Riesgos Laborales) for Spain — governed by Ley 31/1995, de 8 de noviembre, de Prevención de Riesgos Laborales, Article 16, requiring all employers to document their occupational health and safety management system, risk assessment methodology, and preventive measures.
Workplace Harassment Protocol Spain (Protocolo de Acoso Laboral)
A Workplace Harassment Protocol (Protocolo de Acoso Laboral) for Spain — governed by LPRL Article 48 and ET Article 4.2(e), establishing prevention, complaint, and investigation procedures for moral harassment (mobbing) in Spanish companies.
Workplace Adaptation Request Spain (Solicitud de Adaptación del Puesto de Trabajo)
A Workplace Adaptation Request (Solicitud de Adaptación del Puesto de Trabajo) for Spain — governed by Article 25 of the Ley de Prevención de Riesgos Laborales (LPRL, Ley 31/1995), requiring employers to adapt the work post for workers with special health sensitivities, disabilities, or pregnancy, in coordination with the Servicio de Prevención.
Accident Report Form (Ireland)
A workplace accident report form for Irish employers referencing the Safety, Health and Welfare at Work Act 2005 and HSA reporting obligations.
Construction Safety Plan (Ireland)
A site-specific safety and health plan for construction projects in Ireland, required under the Safety, Health and Welfare at Work (Construction) Regulations 2013 (S.I. No. 291 of 2013) and the Safety, Health and Welfare at Work Act 2005. Addresses the roles of the project supervisor for the construction stage (PSCS), risk assessments, method statements, site induction requirements, emergency procedures, and coordination obligations for multiple contractors on a single site.
Farm Safety Statement (Ireland)
A written Farm Safety Statement and Risk Assessment required under the Safety, Health and Welfare at Work Act 2005 and the Safety, Health and Welfare at Work (General Application) Regulations 2007 (S.I. No. 299 of 2007). Every farm employer must identify hazards, assess risks, and document control measures for farm employees. The Health and Safety Authority (HSA) enforces compliance and may issue Improvement Notices or Prohibition Notices for non-compliant farms. Includes biological, chemical, mechanical, and animal-handling hazard categories relevant to Irish farming.
Working from Home Policy (Ireland)
A working from home policy for Irish employers, covering eligibility, equipment, data protection, health and safety, and the right to request remote working under the Work Life Balance Act 2023.
Safety Audit Report (India)
A formal safety audit report for Indian factories and workplaces under the Occupational Safety, Health and Working Conditions Code 2020, which replaced the Factories Act 1948 from 21 November 2025. Documents audit findings, compliance status against applicable provisions, non-conformances, corrective actions, and recommendations for improving occupational health and safety management.
Joint Safety and Hygiene Commission Mexico (Comisión Mixta de Seguridad e Higiene)
A Joint Safety and Hygiene Commission constitution document for Mexico — establishing the bipartite employer-worker safety commission required by the Ley Federal del Trabajo arts. 509–514 and NOM-019-STPS-2011, with member designation, functions, meeting calendar, and STPS registration requirements.
Workplace Emergency Action Plan Mexico (Plan de Emergencia Empresa)
A Workplace Emergency Action Plan (Plan de Emergencia) for Mexico — compliant with NOM-002-STPS-2010 (fire prevention and protection) and Ley Federal del Trabajo art. 509 (Joint Safety and Hygiene Commission). Documents evacuation routes, assembly points, brigade assignments, and emergency response procedures required by the Secretaría del Trabajo y Previsión Social (STPS) for all Mexican workplaces.
Occupational Safety and Health Program Mexico (Programa de Seguridad y Salud en el Trabajo)
An Occupational Safety and Health Program (Programa de Seguridad y Salud en el Trabajo) for Mexico — establishing the employer's annual safety management framework in compliance with the Ley Federal del Trabajo art. 509, NOM-030-STPS-2009 (prevention services and safety programs), and STPS inspection requirements for the Comisión Mixta de Seguridad e Higiene.
Accident Report Form (New Zealand)
A workplace Accident Report Form for New Zealand PCBUs (persons conducting a business or undertaking), prepared in accordance with the Health and Safety at Work Act 2015 (HSWA) and the Accident Compensation Act 2001 (ACA 2001). Covers incident details, injured person information, injury nature, ACC claim information, notifiable event identification (WorkSafe NZ notification), and corrective actions. WorkSafe NZ is the national regulator for workplace health and safety.
Fire Risk Assessment (New Zealand)
A New Zealand Fire Risk Assessment for businesses, landlords, and building owners to identify and manage fire hazards in the workplace or building. References the Fire and Emergency New Zealand Act 2017, Health and Safety at Work Act 2015, Building Act 2004 (Compliance Schedule requirements), and New Zealand Fire Protection Association guidelines. Covers ignition sources, fuel load, detection systems, evacuation, and corrective actions.
Lone Worker Policy (New Zealand)
A New Zealand Lone Worker Policy establishing safety procedures for employees who work alone, in isolation, or outside normal working hours. References the Health and Safety at Work Act 2015 (HSWA) primary duty of care, Health and Safety at Work (General Risk and Workplace Management) Regulations 2016, and WorkSafe NZ lone worker guidance. Covers check-in procedures, emergency contacts, risk assessment, and prohibited lone working activities.
Workplace Accident Report Portugal (Participação de Acidente de Trabalho)
Workplace accident report template for Portugal under Lei 98/2009 establishing the regime for compensation of occupational accidents and diseases.
CNESST Workplace Accident Declaration (Déclaration CNESST — accident du travail) — Quebec
Quebec CNESST workplace accident declaration and employer notice under the Loi sur les accidents du travail et les maladies professionnelles (LATMP, RLRQ, c. A-3.001). Covers accident description, worker information, employer obligations, CNESST reporting deadlines, and worker's right to benefits.
Workplace Safety Assessment — Quebec (Évaluation SST)
Quebec Workplace Safety Assessment (Évaluation SST) for employers. Governed by the Act respecting occupational health and safety (LSST, RLRQ, c. S-2.1) and CNESST. Identify workplace hazards, assess risks, document controls, and establish prevention programs. A prevention program applies from 20 workers per establishment; smaller employers keep a plan d'action.
Incident Report Form (Singapore)
A workplace incident and accident report form for Singapore employers under the WSH (Incident Reporting) Regulations. Captures incident details, root cause analysis, corrective actions, and supports MOM iReport submission for notifiable accidents.
Risk Assessment Form (Singapore)
A workplace risk assessment form for Singapore employers under the WSH (Risk Management) Regulations 2006. Identifies hazards, evaluates likelihood and severity of harm, and documents risk control measures for all workplace activities.
Workplace Risk Management Plan (Singapore)
A workplace risk assessment and risk management plan for Singapore employers, fulfilling the legal duty under section 11 of the Workplace Safety and Health Act 2006 (WSHA) and the WSH (Risk Management) Regulations 2006. Covers hazard identification, risk evaluation, and control measures.
Work Injury Compensation Claim (Singapore)
A WICA claim form for Singapore employees injured at work, under the Work Injury Compensation Act 2019. Covers medical expenses, temporary incapacity leave, and permanent incapacity lump sum compensation under MOM's no-fault compensation scheme.
Workplace Safety and Health Plan (Singapore)
A Workplace Safety and Health (WSH) plan for Singapore employers under the Workplace Safety and Health Act. Documents hazard identification, risk control measures, WSH committee obligations, and incident reporting procedures required by MOM and WSH Council.
Accident Report Form (England & Wales)
Complete a Workplace Accident Report Form for England and Wales. Covers RIDDOR 2013 reporting obligations, HSE notification, Health and Safety at Work Act 1974, Employers' Liability (Compulsory Insurance) Act 1969, and DPA 2018 data protection for witness information.
COSHH Assessment Form (England & Wales)
Create a COSHH Assessment Form for England and Wales. Covers hazard classification under the CLP Regulation, Workplace Exposure Limits from EH40, exposure routes, control measures following the COSHH hierarchy, PPE requirements, health surveillance obligations under regulation 11 COSHH 2002, and emergency procedures.
Fire Risk Assessment (England & Wales)
Create a Fire Risk Assessment for non-domestic premises in England and Wales. Covers the Regulatory Reform (Fire Safety) Order 2005 article 9, Health and Safety at Work etc. Act 1974, Building Regulations 2010 Part B, fire detection, means of escape, fire fighting equipment, persons at special risk, risk rating, action plan, and review schedule.
Workplace Incident Report (England & Wales)
Document a workplace incident, near miss, or dangerous occurrence in England and Wales under the Management of Health and Safety at Work Regulations 1999, RIDDOR 2013, and HSE investigation procedures. Includes root cause analysis, witness data protection (DPA 2018), and corrective action tracking.
Manual Handling Risk Assessment (England & Wales)
Create a Manual Handling Risk Assessment for your UK workplace under the Manual Handling Operations Regulations 1992 (SI 1992/2793). This template follows the four-factor HSE framework from guidance L23 — task, load, environment, and individual capability — and covers existing controls, risk rating (low/medium/high), additional control measures, mechanical aids, RIDDOR obligations, and training requirements. Suitable for warehouses, factories, construction sites, offices, and all workplaces in England and Wales where employees perform manual handling operations. Download as PDF or Word.
Maternity Risk Assessment (England & Wales)
Create a statutory maternity risk assessment for employers in England and Wales. References MHSWR 1999 regs.16-18, Employment Rights Act 1996 ss.66-68, Equality Act 2010 s.18, and Working Time Regulations 1998. Covers hazard identification, risk level, control measures, night work, alternative work, and paid suspension on maternity grounds.
Related Legal Guides
Frequently Asked Questions
Are these health & safety templates free?
Yes. Every health & safety template on Forms Legal can be downloaded as PDF or Word without paying, without registering and without giving an email address.
Can I use these health & safety templates as they are?
Each template is based on the laws named on its document page and is meant as a starting point. No individual document is reviewed by a lawyer. Laws change: check the rules in force and, for important matters, consult a lawyer.
Do I need an account to download a health & safety template?
No. Open the template, fill in the wizard fields you want (or leave them blank to get an empty template) and download it straight away as PDF or Word.
Can I edit a health & safety template after downloading?
Yes. The Word file (.docx) can be edited in Word, Google Docs, LibreOffice or any compatible editor. The details you entered in the wizard already appear in the downloaded document.
What format do I get when I download a health & safety template?
PDF, with a fixed layout ready to print or sign, and Microsoft Word (.docx), which you can edit freely.
How do I know which law a health & safety template is based on?
Document pages name the laws the template refers to, where there are any, and link to the official text where one is available online. Compare them with the current official text before you use the template. The date shown on a document page records the last edit of its text, not a fresh check of the law.