Real Estate
Property Condition Report (Australia)
A Property Condition Report is the legally required document that records the state of a rental property at the start and end of a residential tenancy in Australia.
Key facts
Report Type: [Report Type]
Inspection Date: [Inspection Date]
Property Address: [Property Address]
State / Territory: [State]
1. PARTIES AND TENANCY DETAILS
Landlord / Managing Agent: [Landlord Name] — Contact: [Landlord Contact]
Tenant(s): [Tenant Name]
Tenancy Commencement Date: [Tenancy Start Date]
Bond Amount: [Bond Amount]
This Property Condition Report has been prepared in accordance with the condition report requirements of the residential tenancies legislation applicable in [State]. The purpose of this report is to document the condition of the premises at the commencement of the tenancy (ingoing report) or at the conclusion of the tenancy (outgoing report) to provide a fair and objective basis for determining any bond deductions.
2. INSTRUCTIONS FOR COMPLETING THIS REPORT
This report documents the condition of each area of the property at the time of inspection. Each area is assessed using the following condition categories: GOOD / CLEAN (the area is clean and in good condition with no damage beyond fair wear and tear); FAIR (the area shows some wear consistent with normal use); POOR (the area requires attention, maintenance, or repair); or N/A (the area is not applicable to this property).
For INGOING reports: The landlord or agent must provide a completed copy of this report to the tenant within the period prescribed by the applicable Act (typically at or before the commencement of the tenancy). The tenant has the right to add comments and return the report within the prescribed period (commonly 3 to 7 business days). The landlord must keep a copy of the signed report for the duration of the tenancy and for any applicable limitation period thereafter.
For OUTGOING reports: The condition of the property at the end of the tenancy should be compared against the ingoing condition report. The tenant is entitled to be present at the outgoing inspection if they request to attend. Any deductions from the bond must be based on damage beyond fair wear and tear, not on normal deterioration from use. The bond authority (NSW Fair Trading, RTBA, or RTA) will use this report to assess any disputed bond claims.
3. ENTRY, HALLWAY AND COMMON AREAS
Condition: [Entry Condition]
Notes: [Entry Notes]
4. LIVING ROOM AND DINING ROOM
Condition: [Living Room Condition]
Notes: [Living Room Notes]
5. KITCHEN
Condition: [Kitchen Condition]
Notes: [Kitchen Notes]
LAUNDRY
Condition: [Laundry Condition]
Notes: [Laundry Notes]
6. BEDROOM(S)
Condition: [Bedrooms Condition]
Notes: [Bedrooms Notes]
BATHROOM(S) AND TOILET(S)
Condition: [Bathrooms Condition]
Notes: [Bathrooms Notes]
7. EXTERNAL AREAS AND GARAGE
Condition: [External Condition]
Notes: [External Notes]
KEYS AND ACCESS DEVICES PROVIDED
[Keys Provided]
GENERAL NOTES AND OTHER ITEMS
[Additional Notes]
8. BOND LODGEMENT INFORMATION
The bond of [Bond Amount] collected at the commencement of this tenancy must be lodged with the applicable state bond authority within the period prescribed by the relevant Act:
New South Wales: NSW Fair Trading — Bond must be lodged within ten (10) days of collection. Online lodgement available via the NSW Fair Trading website. Tenants will receive a bond lodgement notification.
Victoria: Residential Tenancies Bond Authority (RTBA) — Bond must be lodged within ten (10) business days of collection. Online lodgement available via the RTBA website.
Queensland: Residential Tenancies Authority (RTA) — Bond must be lodged within ten (10) days of collection. Lodgement via the RTA website or the RTA app.
Western Australia: Bond Administrator (Department of Mines, Industry Regulation and Safety) — Bond must be lodged within 14 days of collection.
At the end of the tenancy, the bond may be claimed (with the tenant's agreement) for unpaid rent, damage beyond fair wear and tear, outstanding cleaning costs, or other amounts lawfully owed under the tenancy agreement. If the tenant disputes the landlord's bond claim, the dispute must be referred to the applicable state bond authority or tenancy tribunal.
SIGNATURES
By signing this report, the parties confirm the accuracy of the condition assessments as at the date of inspection.
LANDLORD / AGENT: [Landlord Name]
Inspection Date: [Inspection Date]
TENANT: [Tenant Name]
Inspection Date: [Inspection Date]
Note: The tenant may add comments to any section of this report within the period prescribed by the applicable Residential Tenancies Act after receiving the landlord's completed copy. A copy of the signed report (including any tenant comments) must be provided to the tenant and retained by the landlord for the duration of the tenancy.
Landlord / Agent
________________
Signature
Date: ________________
Tenant
________________
Signature
Date: ________________
What Is a Property Condition Report (Australia)?
A Property Condition Report in Australia grants a tenant the right to occupy residential premises and records the rent, bond, term, and the repair and notice obligations of landlord and tenant under the Residential Tenancies Act 2010 (NSW) and equivalent state and territory residential tenancies legislation.
In Australian residential tenancy law, the condition report is not merely a good practice document — it is a legal requirement. The obligation to provide a condition report to the tenant at the commencement of the tenancy is imposed by statute in New South Wales (section 29, Residential Tenancies Act 2010), Victoria (section 35, Residential Tenancies Act 1997), Queensland (section 65, Residential Tenancies and Rooming Accommodation Act 2008), Western Australia (Residential Tenancies Act 1987), South Australia (Residential Tenancies Act 1995), Tasmania (Residential Tenancy Act 1997), the ACT (Residential Tenancies Act 1997), and the Northern Territory (Residential Tenancies Act 1999).
The report works in conjunction with the security bond. The landlord collects the bond at the start of the tenancy and lodges it with the relevant state bond authority. The bond is held in trust until the end of the tenancy. When the tenancy ends, the parties use the ingoing condition report to compare the starting and ending condition of the property. If the landlord claims a bond deduction for damage, the ingoing condition report is the critical evidence establishing what the property's condition was at the start of the tenancy.
A well-prepared condition report protects both parties. For the landlord, it provides documentary evidence of the property's condition at the commencement of the tenancy, which is essential for recovering the cost of damage from the bond at the end. For the tenant, the condition report protects them from being held responsible for damage that was already present when they moved in. Tenants have the right to add their own comments to the ingoing condition report within the prescribed period after receiving it, and to note any pre-existing marks, damage, or items they disagree with.
When Do You Need a Property Condition Report (Australia)?
A Property Condition Report is required at the commencement of every residential tenancy in Australia, regardless of whether the property is managed by a real estate agent or directly by the landlord. It is also completed at the end of the tenancy for the outgoing inspection.
The ingoing condition report must be completed before or at the time the tenant is given access to the premises. The landlord must provide a copy of the completed report to the tenant. The tenant then has a set period (commonly three to seven business days depending on the state) to review the report, make comments, sign, and return a copy to the landlord.
An outgoing condition report is completed after the tenant vacates the property and returns all keys. The outgoing report is compared against the ingoing report to identify any deterioration in condition that exceeds fair wear and tear. The tenant is entitled to attend the outgoing inspection if they request to be present.
You should use a condition report template in the following situations: when a new tenancy is commencing and you need to document the property's condition before handing over keys; when a tenancy is ending and you need to conduct a thorough outgoing inspection and compare the property's condition against the ingoing report; when a tenant has been in possession for an extended period and you want to document the current condition for mid-tenancy purposes; and when a property changes management agent and you need to document the condition at the time of handover.
For landlords who manage multiple properties, maintaining a consistent and thorough condition report process is one of the most effective ways to protect the value of their investment and resolve any bond disputes efficiently and without going to tribunal.
What to Include in Your Property Condition Report (Australia)
A thorough Australian Property Condition Report should address the following key elements to be effective as a legal document in the event of a bond dispute.
The report header must record the type of report (ingoing or outgoing), the inspection date, the full address of the property, and the names of the landlord and tenant. This information establishes the context for the condition assessments and confirms the report can be clearly linked to the relevant tenancy agreement and bond lodgement.
The room-by-room condition assessments are the core of the report. Each area of the property should be assessed individually, using a consistent condition rating (such as Good / Clean, Fair, Poor, or N/A). For each area, the assessor should note specific observations about the condition of walls, ceilings, floors, windows, blinds and curtains, light fittings, power points, and any fixtures or appliances in that area. The notes should be specific enough to describe the exact nature and location of any existing marks or defects.
The kitchen and bathroom assessments are particularly important because these areas are the most prone to damage disputes. The report should note the condition of all appliances (oven, cooktop, dishwasher, rangehood, washing machine trough), the state of grouting and tile surfaces in bathrooms, the condition of shower screens, and the operation of all taps and fixtures.
The keys and access devices section must list every key, remote control, swipe card, and access device provided to the tenant at the commencement of the tenancy. At the end of the tenancy, all listed items must be returned. Failure to return keys can result in a bond deduction for rekeying costs.
For ingoing reports, the bond lodgement information section reminds the landlord of their legal obligation to lodge the bond with the relevant state bond authority within the prescribed period. This is a non-negotiable obligation — a landlord who retains the bond in their own account rather than lodging it with the bond authority commits a criminal offence under the applicable Residential Tenancies Act.
The signature section should include spaces for both the landlord (or agent) and the tenant to sign and date the report. Where the tenant makes comments or amendments to the report, these should be clearly recorded and both parties should initial any changes. The landlord must provide the tenant with a signed copy of the completed report (including any tenant comments) and must retain the original for the duration of the tenancy.
Sources & Citations
Statutory citations link to the official government text where one is available, otherwise to a free law library named next to the link.
- Residential Tenancies Act 2010AU official
Cite this page
CC BY 4.0 · free to citeReference this free template in an article, syllabus, or research note:
Forms Legal. (2026). Property Condition Report (Australia) [Legal document template]. Forms Legal. https://forms-legal.com/australia/real-estate/property/property-condition-report-australia
"Property Condition Report (Australia)." Forms Legal, 2026, https://forms-legal.com/australia/real-estate/property/property-condition-report-australia.
Forms Legal. "Property Condition Report (Australia)." Forms Legal, 2026. https://forms-legal.com/australia/real-estate/property/property-condition-report-australia.
@misc{formslegal-property-condition-report-australia,
author = {{Forms Legal}},
title = {Property Condition Report (Australia)},
year = {2026},
howpublished = {\url{https://forms-legal.com/australia/real-estate/property/property-condition-report-australia}},
note = {Free legal document template. Based on Residential Tenancies Act 2010 (NSW) and state/territory residential tenancies legislation}
}{{cite web |title=Property Condition Report (Australia) |website=Forms Legal |publisher=Forms Legal |date=2026 |url=https://forms-legal.com/australia/real-estate/property/property-condition-report-australia}}TY - ELEC T1 - Property Condition Report (Australia) T2 - Forms Legal PB - Forms Legal PY - 2026 UR - https://forms-legal.com/australia/real-estate/property/property-condition-report-australia ER -
Also available for these jurisdictions:
Frequently Asked Questions
Is a property condition report legally required for residential rentals in Australia?
Yes. A property condition report is required by law in all major Australian states and territories for residential tenancies. In New South Wales, the requirement is set out in section 29 of the Residential Tenancies Act 2010 (NSW), which requires the landlord to give the tenant a written condition report documenting the state of repair and general condition of the premises at the commencement of the tenancy. In Victoria, section 35 of the Residential Tenancies Act 1997 (VIC) imposes the equivalent obligation, with Consumer Affairs Victoria providing a prescribed form. In Queensland, section 65 of the Residential Tenancies and Rooming Accommodation Act 2008 (QLD) requires the lessor to provide a general condition report. Failure to provide a condition report does not affect the validity of the tenancy but can significantly undermine the landlord's ability to make deductions from the bond at the end of the tenancy, because without a documented ingoing condition report, the landlord cannot prove what condition the property was in at the start.
What is the difference between fair wear and tear and tenant damage in Australia?
Fair wear and tear refers to the natural and reasonable deterioration of a property resulting from ordinary everyday use by the tenant and their household. Examples of fair wear and tear include minor scuff marks on walls from everyday living, slight fading of paintwork or curtains from sunlight, carpet flattening from normal foot traffic, and small chips on benchtops or fixtures resulting from normal use. Tenant damage, by contrast, is deterioration or destruction caused by the tenant's careless, negligent, or deliberate conduct beyond the scope of ordinary use. Examples include holes in walls, burns on carpet or benchtops, broken windows, graffiti, pet damage, and staining caused by failure to clean up spills. A landlord is entitled to claim bond deductions for tenant damage but cannot claim for fair wear and tear. The distinction is assessed case by case, taking into account the age of the property, the length of the tenancy, and the nature of the item damaged. The relevant tenancy tribunal will use the ingoing and outgoing condition reports (and any accompanying photographs) to assess whether claimed damage goes beyond fair wear and tear.
How must the bond be lodged and who holds it in Australian residential tenancies?
Under Australian residential tenancies legislation, the landlord or agent must lodge the bond with the applicable state bond authority within the period prescribed by the relevant Act — not hold it privately. In New South Wales, bonds must be lodged with NSW Fair Trading within ten days of collection under the Residential Tenancies Act 2010 (NSW). In Victoria, bonds must be lodged with the Residential Tenancies Bond Authority (RTBA) within ten business days under the Residential Tenancies Act 1997 (VIC). In Queensland, bonds must be lodged with the Residential Tenancies Authority (RTA) within ten days under the RTRA Act 2008 (QLD). In Western Australia, bonds must be lodged with the Bond Administrator (Department of Mines, Industry Regulation and Safety) within 14 days. The bond authority holds the bond on trust for both the landlord and the tenant. At the end of the tenancy, the bond can only be released with the written agreement of both parties or pursuant to an order of the applicable tenancy tribunal (NCAT in NSW, VCAT in VIC, QCAT in QLD). A landlord who fails to lodge the bond within the prescribed period commits an offence under the applicable Act.
What happens at the outgoing inspection at the end of a tenancy in Australia?
The outgoing inspection (also called an end-of-tenancy inspection or vacate inspection) is conducted after the tenant has moved out of the property to assess its condition and compare it against the ingoing condition report. The tenant is entitled to be present at the outgoing inspection in all Australian states if they request to attend. The landlord or property manager inspects every room and area of the property, noting any damage or deterioration beyond fair wear and tear. If damage is identified, the landlord must itemise the cost of repair and notify the tenant of any proposed bond deductions. If the tenant agrees to the deductions, the bond authority can release the relevant amount to the landlord and return the balance to the tenant without the need for a tribunal hearing. If the tenant disputes the deductions, either party may apply to the applicable tenancy tribunal for a bond claim order. The tribunal will consider the ingoing condition report, the outgoing inspection findings, any photographs, quotes for repairs, and other evidence when making its determination.
Can photographs be used as part of a property condition report in Australia?
Yes, and in some states photographs are now required. In New South Wales, the Residential Tenancies Regulation 2019 (NSW) requires landlords to provide photographs documenting the condition of the premises as part of the condition report given to the tenant at the commencement of the tenancy. Photographs provide an objective visual record that supplements the written condition assessments and is often the most persuasive evidence in a bond dispute. Established practice for landlords and property managers is to take date-stamped photographs of every room, all fixtures and fittings, and any existing damage or marks at both the ingoing and outgoing inspections, and to retain these photographs for the duration of the limitation period for tenancy disputes. Tenants should also photograph the property at the time they conduct their own review of the ingoing condition report, to protect themselves against unfair bond claims for pre-existing damage.
This template is provided for informational purposes only and does not constitute legal advice. Laws vary by jurisdiction and change over time. Consult a qualified attorney for advice specific to your situation.Full disclaimer
Found an error? Let us knowRelated Documents
You may also find these documents useful:
Residential Tenancy Agreement (Australia)
Create a Residential Tenancy Agreement for any Australian state or territory. Covering landlord and tenant rights, rent, bond, condition report, maintenance obligations, break fees, and termination procedures in accordance with the NSW Residential Tenancies Act 2010, VIC Residential Tenancies Act 1997, QLD Residential Tenancies and Rooming Accommodation Act 2008, and equivalent state legislation.
Notice to Vacate (Australia)
A Notice to Vacate is a formal written notice issued by a landlord requiring a tenant to leave a rental property by a specified date. In Australia, the right to issue a notice to vacate — and the minimum notice periods that must be observed — is governed by the residential tenancy legislation in each state and territory. Landlords who fail to follow the prescribed notice periods and procedural requirements risk having the notice declared invalid by the relevant tribunal. Under the Residential Tenancies Act 2010 (NSW), a landlord can no longer end a tenancy without a reason: since 19 May 2025 every notice must rely on a ground listed in the Act, and the end of a fixed term is not a ground on its own. Where the ground is a breach of the agreement by the tenant, such as non-payment of rent, 14 days' written notice applies. A landlord who requires the property for their own or a family member's use, or who plans to sell, renovate or change its use, must give 90 days' notice for a periodic agreement or a fixed term longer than 6 months, and 60 days for a fixed term of 6 months or less. In Victoria, under the Residential Tenancies Act 1997, a notice to vacate for a periodic agreement has needed a valid reason since 29 March 2021, and since 25 November 2025 the end of a fixed term is no longer a reason on its own. For rent arrears of at least 14 days, the notice period is 14 days. Sale, renovation, demolition, a change of use and the owner or an immediate family member moving in all require 90 days' notice, with supporting evidence given with the notice. In Queensland, under the Residential Tenancies and Rooming Accommodation Act 2008, a lessor must give a notice to leave on an approved ground. The end of a fixed-term agreement is one such ground and needs at least two months' notice; sale and the owner moving in also need two months' notice and cannot end a fixed term early. For rent arrears, a notice to remedy breach must come first, and if the rent is still unpaid a notice to leave can give 7 days. Western Australia still allows a no-grounds notice under the Residential Tenancies Act 1987 (60 days for a periodic tenancy, 30 days at the end of a fixed term), although the WA Government announced in May 2026 that it plans to remove it. South Australia has required a prescribed ground since 1 July 2024, including to decline to renew a fixed term. The ACT removed 'no cause' evictions on 1 April 2023. In Tasmania, a fixed-term lease can be ended at expiry by a notice given 42 to 60 days before the end date. The state rules above were last checked against the official tenancy regulators (NSW Fair Trading, Consumer Affairs Victoria, the RTA in Queensland, Consumer and Business Services SA, Consumer Protection WA, the ACT Government, NT Consumer Affairs and Consumer, Building and Occupational Services Tasmania) in October 2026. A valid notice to vacate must be in writing and must include the address of the premises, the reason for the notice (where required), the date by which the tenant must vacate, and the landlord's contact details. In some states, the notice must also refer to the specific ground or section of the Act under which it is being issued. The notice must be served in a manner permitted by the relevant Act — typically by personal delivery, registered post, or email (where the tenant has consented to electronic service). If the tenant does not vacate by the date specified in a valid notice, the landlord must apply to the relevant tribunal for a possession order. In New South Wales, this is the NSW Civil and Administrative Tribunal (NCAT); in Victoria, it is the Victorian Civil and Administrative Tribunal (VCAT); and in Queensland, it is the Queensland Civil and Administrative Tribunal (QCAT). A tribunal will generally only make a possession order if the notice was validly issued and properly served, and the grounds stated in the notice are established. For landlords, using a clear and properly drafted notice to vacate helps ensure the notice is legally valid and reduces the risk of a successful challenge by the tenant. For tenants, receiving a notice to vacate does not necessarily mean you are required to leave immediately — you should check the notice period, the stated ground, and whether the applicable notice periods have been complied with. If you have any doubt about the validity of the notice you have received, you should seek advice from your state's tenant advisory service, community legal centre, or a solicitor experienced in tenancy law. This template is designed to assist landlords in preparing a clear, properly documented notice to vacate that complies with the general requirements of Australian residential tenancy legislation. It should be reviewed and adapted to reflect the specific requirements of the state or territory in which the property is located.
Commercial Lease Agreement (Australia)
Create a comprehensive Australian Commercial Lease Agreement covering permitted use, rent and GST, CPI and market rent reviews, outgoings, bank guarantee, make good obligations, assignment conditions, insurance requirements, and option to renew. References state-specific Retail Leases Acts (NSW, VIC, QLD, WA, SA) and the GST Act 1999.