Real Estate
Boundary Fence Agreement (Australia)
A Boundary Fence Agreement in Australia records the rights and responsibilities of adjoining landowners over a shared dividing fence, consistent with the dividing fences legislation of each state and territory.
Key facts
This Boundary Fence Agreement ("Agreement") is made on [Agreement Date] between the adjoining property owners described below, in respect of the dividing fence on the boundary described herein. This Agreement is made pursuant to the applicable fencing legislation of [State], including (as applicable) the Fences Act 1968 (VIC), the Dividing Fences Act 1991 (NSW), the Neighbourhood Disputes (Dividing Fences and Trees) Act 2011 (Qld), the Dividing Fences Act 1961 (WA), the Fences Act 1975 (SA), and the Boundary Fences Act 1908 (TAS).
1. THE PARTIES
FIRST OWNER: [Owner A Name], of [Owner A Address], telephone [Owner A Phone], email [Owner A Email] ("Owner A").
SECOND OWNER: [Owner B Name], of [Owner B Address], telephone [Owner B Phone], email [Owner B Email] ("Owner B").
Owner A and Owner B are the owners of adjoining properties in [State] separated by the boundary described in clause 2 below, and have agreed to the construction, repair, or replacement of the dividing fence on the terms set out in this Agreement.
2. THE BOUNDARY AND FENCE LOCATION
The dividing fence covered by this Agreement is located on or adjacent to: [Boundary Description].
Total fence length: [Fence Length].
Location of fence on boundary: [Fence Location].
Under the applicable legislation of [State], a dividing fence is a fence that separates the land of adjoining owners. Both owners are equally responsible for contributing to the cost of a sufficient dividing fence on the common boundary between their properties, unless otherwise agreed in writing or determined by a tribunal or court.
3. FENCE TYPE AND WORKS
Type of Work: [Work Type].
Fence Type and Specifications: [Fence Type].
Specific Works to be Carried Out: [Work Description].
Proposed Work Start Date: [Work Start Date].
Expected Completion Date: [Work Completion Date].
Both owners agree that the fence type and specifications described above constitute a sufficient dividing fence for the purposes of the applicable fencing legislation of [State]. All works must be carried out in a good and workmanlike manner using materials of the quality and type specified above. The fence must be constructed (or repaired) in accordance with any applicable local council requirements, including any development approval or building permit required by the council of [State].
4. COST AND CONTRIBUTIONS
Total Estimated Cost: [Total Cost] (AUD, including GST).
Owner A's Contribution: [Owner A Contribution].
Owner B's Contribution: [Owner B Contribution].
Contractor: [Contractor].
Payment Terms: [Payment Terms].
If the actual cost of the works exceeds the estimated cost by more than 10%, the parties must consult and agree in writing before the additional works proceed. If either owner fails to pay their agreed contribution when due, the other owner may recover the unpaid amount through the applicable fencing dispute resolution mechanism in [State], including application to the Magistrates' Court, Victorian Civil and Administrative Tribunal (VCAT), Queensland Civil and Administrative Tribunal (QCAT), or the equivalent tribunal or court in the relevant state or territory.
5. MAINTENANCE AND ONGOING RESPONSIBILITY
Ongoing Maintenance: [Maintenance Responsibility].
Under the applicable fencing legislation of [State], both adjoining owners are generally equally responsible for the maintenance and repair of a dividing fence after its construction, in the absence of any agreement to the contrary. Future maintenance, repair, and replacement costs are to be shared in accordance with the applicable legislation unless the parties otherwise agree in writing at the time the maintenance or repair is required.
6. ACCESS AND COMPLETION
Access Arrangements: [Access Arrangements].
Each owner agrees to provide reasonable access to their property to the extent necessary for the contractor to carry out the fencing works. Each owner must take all reasonable steps to ensure that their property is clear of obstructions (including vegetation, stored items, and structures) along the boundary line before the works commence. Any damage to either owner's property caused by the contractor in the course of carrying out the fencing works must be promptly repaired at the contractor's expense.
Upon completion of the works, the contractor must remove all construction waste, old fencing materials, and debris from both owners' properties. Both owners must be given the opportunity to inspect the completed fence before final payment is made to the contractor.
7. ADDITIONAL TERMS
Additional Terms: [Additional Terms]
Where the parties have agreed to a fence type or specification that is more expensive than the sufficient dividing fence to which either owner would otherwise be entitled under the applicable legislation, the owner requesting the upgrade is responsible for any additional cost above the cost of a sufficient fence, unless both owners have agreed to share the additional cost equally or in some other proportion as recorded above.
8. DISPUTE RESOLUTION
If a dispute arises between the owners in connection with this Agreement — including any dispute about the quality of the works, the cost sharing, or the contractor's performance — the owners agree to first attempt to resolve the dispute by direct negotiation in good faith within fourteen (14) days of the dispute arising. If the dispute cannot be resolved by negotiation, either owner may refer the matter to the applicable fencing dispute resolution body in [State], including the Magistrates' Court, VCAT, QCAT, or the relevant state tribunal or court with jurisdiction to hear fencing disputes under the applicable legislation.
9. GENERAL PROVISIONS
This Agreement is governed by and construed in accordance with the laws of [State]. This Agreement constitutes the entire agreement between the owners regarding the fencing works described herein and supersedes all prior oral or written discussions and agreements. This Agreement may be amended only by a written instrument signed by both owners. The statutory dividing fence obligations under the applicable fencing legislation continue to apply to later owners of each property, and an owner who sells a property should disclose this Agreement to the purchaser.
SIGNATURES
SIGNED by OWNER A: [Owner A Name]
Property: [Owner A Address]
Date: [Agreement Date]
SIGNED by OWNER B: [Owner B Name]
Property: [Owner B Address]
Date: [Agreement Date]
Owner A
________________
Signature
Date: ________________
Owner B
________________
Signature
Date: ________________
What Is a Boundary Fence Agreement (Australia)?
A Boundary Fence Agreement in Australia records the rights and responsibilities of adjoining landowners over a shared dividing fence, consistent with the dividing fences legislation of each state and territory.
In Australia, the obligation for neighbouring property owners to share the cost of a dividing fence is established by legislation in each state and territory. The Fences Act 1968 (VIC), the Dividing Fences Act 1991 (NSW), the Neighbourhood Disputes (Dividing Fences and Trees) Act 2011 (Qld), the Dividing Fences Act 1961 (WA), the Fences Act 1975 (SA), the Boundary Fences Act 1908 (TAS), and the Civil Law (Property) Act 2006 (ACT) all establish the principle that adjoining owners share the cost of a sufficient dividing fence equally. A dividing fence is defined as a fence that separates the land of adjoining owners, whether or not it is on the common boundary of the land.
A written Boundary Fence Agreement is the most practical and efficient way to manage a fencing project between neighbours. By documenting the agreed terms before the works commence, both owners avoid the need for formal fencing notices and statutory dispute resolution procedures. The written agreement also provides clear evidence of what was agreed if any dispute arises after the fence is built — for example, about the quality of the workmanship, the cost allocation, or the maintenance responsibilities.
The Australia Boundary Fence Agreement (Australia) template is suitable for both new fence construction and the repair or replacement of an existing fence between residential properties in any Australian state or territory.
When Do You Need a Boundary Fence Agreement (Australia)?
A Boundary Fence Agreement is useful whenever two adjoining property owners need to formalise their arrangement for a dividing fence project. Having a written agreement is always preferable to a verbal arrangement, even when neighbours are on good terms, because it provides a clear record of what was agreed and reduces the risk of misunderstandings or disputes after the work is done.
You need a Boundary Fence Agreement when you and your neighbour have agreed to construct a new fence on your common boundary and want to document the fence type, cost sharing, and payment arrangements; when your existing dividing fence has deteriorated and both owners agree it needs to be repaired or replaced; when one owner wants to upgrade the fence to a higher standard than the minimum required and the parties need to agree on how the additional cost will be allocated; when the owner of a newly developed property needs to establish a dividing fence with an existing neighbour for the first time; or when your neighbour has asked you to agree to a fencing proposal and you want to document the terms before giving your consent.
A boundary fence agreement is also useful when the standard fencing notice and response procedures under the applicable state legislation are too slow or formal for neighbours who are already in agreement about the fence — the written agreement can substitute for the statutory notice process where both parties have already reached consensus.
The Australia Boundary Fence Agreement (Australia) agreement is not suitable for resolving a dispute where the neighbours cannot agree — in that case, the parties should follow the formal fencing notice procedure under the applicable state legislation and, if necessary, apply to the relevant tribunal or court for a fencing order.
What to Include in Your Boundary Fence Agreement (Australia)
A well-drafted Boundary Fence Agreement should cover all of the following key elements to be clear, thorough, and legally effective.
Identification of parties and properties: The agreement must identify both property owners by their full legal names and describe the properties by their street addresses and title references. This confirms that the agreement is clearly linked to the relevant land and is clearly linked to the land it concerns.
Boundary description: The boundary where the fence is located must be clearly described, including the lot and plan references for both properties, the approximate length of the boundary, and the proposed location of the fence on or near the boundary line. Where the exact boundary position is in dispute, a survey may be required before the fence is built.
Fence type and specifications: The agreement must specify the fence type, materials, height, colour, post type, post spacing, and any other relevant specifications. Precise specifications reduce the risk of disputes about quality and appearance after the fence is completed. Where a specific product is required (such as a particular brand or colour of Colorbond), this should be stated.
Works description: The works to be carried out must be described in sufficient detail, including site preparation, removal and disposal of any existing fence, construction methodology, and completion standards.
Cost sharing: The total estimated cost, each owner's contribution, and the basis for any departure from the standard 50/50 split must be clearly stated. Where one owner is requesting a more expensive fence, the agreement must record that the upgrading owner bears the additional cost.
Contractor and payment terms: The name of the agreed contractor, the payment mechanism (direct payment by each owner or reimbursement arrangement), and the timing of payment must all be stated.
Maintenance responsibilities: The agreement should address who is responsible for future maintenance, repainting, and repair of the completed fence to avoid disputes in subsequent years.
Dispute resolution: Including a dispute resolution clause — requiring the parties to attempt negotiation before resorting to tribunal or court proceedings — encourages neighbours to resolve issues cooperatively.
Sources & Citations
Statutory citations link to the official government text where one is available, otherwise to a free law library named next to the link.
- The Fences Act 1968AU official
Cite this page
CC BY 4.0 · free to citeReference this free template in an article, syllabus, or research note:
Forms Legal. (2026). Boundary Fence Agreement (Australia) [Legal document template]. Forms Legal. https://forms-legal.com/australia/real-estate/property/boundary-fence-agreement-australia
"Boundary Fence Agreement (Australia)." Forms Legal, 2026, https://forms-legal.com/australia/real-estate/property/boundary-fence-agreement-australia.
Forms Legal. "Boundary Fence Agreement (Australia)." Forms Legal, 2026. https://forms-legal.com/australia/real-estate/property/boundary-fence-agreement-australia.
@misc{formslegal-boundary-fence-agreement-australia,
author = {{Forms Legal}},
title = {Boundary Fence Agreement (Australia)},
year = {2026},
howpublished = {\url{https://forms-legal.com/australia/real-estate/property/boundary-fence-agreement-australia}},
note = {Free legal document template. Based on State dividing fences legislation (for example Fences Act 1968 (VIC); Dividing Fences Act 1991 (NSW))}
}{{cite web |title=Boundary Fence Agreement (Australia) |website=Forms Legal |publisher=Forms Legal |date=2026 |url=https://forms-legal.com/australia/real-estate/property/boundary-fence-agreement-australia}}TY - ELEC T1 - Boundary Fence Agreement (Australia) T2 - Forms Legal PB - Forms Legal PY - 2026 UR - https://forms-legal.com/australia/real-estate/property/boundary-fence-agreement-australia ER -
Frequently Asked Questions
Do neighbours have to share the cost of a dividing fence equally in Australia?
Under the fencing legislation in all Australian states and territories, adjoining property owners are generally required to contribute equally (50/50) to the cost of a 'sufficient' dividing fence between their properties. A sufficient fence is one that is appropriate for the locality and the use of the land on each side. The equal cost sharing principle applies to construction, repair, and replacement of the dividing fence. However, where one owner requests a fence that is more expensive than a sufficient fence — for example, a higher fence, a premium material, or additional gates — that owner is responsible for the additional cost above the cost of a sufficient fence. In Victoria, this principle is established under the Fences Act 1968 (VIC). In New South Wales, it is established under the Dividing Fences Act 1991 (NSW). Both owners can agree in writing to a different cost-sharing arrangement, and this written agreement will prevail over the default equal-sharing rule.
What is a fencing notice and when must one be served before building a dividing fence?
A fencing notice (called a 'notice to contribute' in Queensland) is a formal notice served by one adjoining owner on the other before carrying out fencing works, setting out the proposed fence type, location, cost, and each owner's contribution. The fencing notice process is established by statute in each jurisdiction. In Victoria under the Fences Act 1968 (VIC), an owner must serve a fencing notice on the adjoining owner and allow one month for the adjoining owner to respond before commencing works (except in urgent cases). In New South Wales under the Dividing Fences Act 1991 (NSW), a similar notice requirement applies. If the owners enter into a written Boundary Fence Agreement before works commence, the formal fencing notice process is generally not required — the written agreement replaces the statutory notice process by documenting the owners' consensus. This is one of the key advantages of using a written boundary fence agreement.
What happens if a neighbour refuses to contribute to the cost of repairing or replacing a dividing fence?
If an adjoining owner refuses to contribute to the cost of a necessary dividing fence repair or replacement after receiving a fencing notice, the owner who initiated the notice may apply to the relevant tribunal or court for a fencing order. In Victoria, applications are made to the Magistrates' Court or VCAT under the Fences Act 1968 (VIC). In New South Wales, applications are made to the Local Court under the Dividing Fences Act 1991 (NSW). In Queensland, applications are made to the Queensland Civil and Administrative Tribunal (QCAT) under the Neighbourhood Disputes (Dividing Fences and Trees) Act 2011 (Qld). A fencing order can compel the adjoining owner to pay their share of the fencing costs and may also specify the type of fence to be built and the timeline for construction. If the adjoining owner does not comply with a fencing order, the order can be enforced as a judgment debt, and in some jurisdictions the initiating owner can carry out the works and recover the cost from the adjoining owner as a debt.
Can I build a higher or more expensive fence than my neighbour agrees to?
Yes — you can build a fence that is higher or of a better quality than the minimum sufficient dividing fence to which your neighbour is required to contribute, but you must bear the additional cost yourself. Under the Fences Act 1968 (VIC) and the equivalent legislation in other states, if you want a fence that is more expensive than what would constitute a sufficient dividing fence for the locality, you can carry out the works but your neighbour's obligation is limited to contributing to the cost of a sufficient fence only. You pay the difference between the cost of the sufficient fence and the cost of the fence you have chosen. For example, if a timber paling fence would be a sufficient dividing fence costing $4,000, but you want a Colorbond steel fence costing $6,800, your neighbour is only required to contribute $2,000 (half the cost of the sufficient timber fence). You pay $4,800 (your $2,000 share of the sufficient fence plus the full $2,800 upgrade cost). This cost allocation should be recorded in the written boundary fence agreement.
Who is responsible for maintaining a dividing fence after it is built?
Under Australian fencing legislation, both adjoining owners are generally equally responsible for maintaining and repairing a dividing fence after it has been constructed. Ongoing maintenance obligations mirror the cost-sharing principle that applied to the original construction: both owners contribute equally to the cost of maintaining a sufficient dividing fence. If the fence deteriorates to the point where it needs significant repair or replacement, either owner may initiate the fencing notice process to compel the other owner to share the repair costs. Practical maintenance responsibilities — such as which side of the fence each owner paints, who removes vegetation growing against the fence, and how repairs are arranged — are best addressed in the written boundary fence agreement at the time the fence is constructed or repaired. Clear maintenance arrangements in the written agreement reduce the likelihood of disputes between neighbours in the years after the fence is built.
Does a boundary fence agreement bind future owners if a property is sold?
Statutory dividing-fence obligations bind later owners. A private agreement binds successors only if it is registered as a covenant on title, so ask a conveyancer whether to register it. Vendors selling a property where a boundary fence agreement exists should disclose the agreement to prospective purchasers and ensure it is included in the contract of sale documents. Similarly, purchasers should ask their solicitor to check for any existing fencing agreements or pending fencing notices affecting the property before exchange.
This template is provided for informational purposes only and does not constitute legal advice. Laws vary by jurisdiction and change over time. Consult a qualified attorney for advice specific to your situation.Full disclaimer
Found an error? Let us knowRelated Documents
You may also find these documents useful:
Property Sale Contract (Australia)
A Property Sale Contract (also called a Contract for Sale of Land) is the foundational legal document used in every residential and rural property transaction in Australia. This contract records the agreed terms between the vendor (seller) and the purchaser (buyer), and once executed and exchanged by both parties, it becomes legally binding. Unlike some other countries, Australian conveyancing practice requires a written contract before a binding sale can occur, and each state and territory has its own legislative framework governing the content and enforceability of that contract. In New South Wales, the sale of residential property is governed by the Conveyancing Act 1919 (NSW) and the Conveyancing (Sale of Land) Regulation 2022. Section 52A of the Conveyancing Act 1919 requires the vendor to attach a prescribed set of documents to the contract before it is signed by the purchaser, including a copy of the title search, a drainage diagram, a sewer service diagram, a copy of any planning certificate issued under section 10.7 of the Environmental Planning and Assessment Act 1979, and copies of any documents creating easements, covenants, or restrictions affecting the property. Failure to attach these documents entitles the purchaser to rescind the contract at any time before settlement. In Victoria, residential property sales are regulated by the Sale of Land Act 1962 (Vic) and the Estate Agents Act 1980 (VIC). The vendor must provide a Section 32 Vendor Statement (also called a vendor's statement) before the contract is signed. The Section 32 statement must disclose all mortgages and other encumbrances on the property, outgoings such as rates and council charges, any notices affecting the property, planning scheme information, and building permits issued in the past seven years. A failure to provide a compliant Section 32 statement can entitle the purchaser to rescind the contract prior to settlement. A key feature of Australian residential property contracts is the cooling-off period, which gives the purchaser a statutory right to withdraw from the contract within a specified number of business days without having to give reasons. In New South Wales, the cooling-off period is five business days under section 66S of the Conveyancing Act 1919. In Victoria, the cooling-off period is three business days under section 31 of the Sale of Land Act 1962. In Queensland, the statutory cooling-off period is five business days. In South Australia, it is two clear business days. If the purchaser exercises the cooling-off right, the vendor is entitled to retain the rescission fee fixed by the relevant state legislation (in New South Wales, 0.25% of the purchase price; in Victoria, the greater of $100 or 0.2% of the purchase price), and the balance of any deposit paid must be refunded. The cooling-off right does not apply where the property was sold at auction. The deposit is a critical component of the Australian property sale contract. The standard deposit amount is 10% of the purchase price, paid on exchange of contracts. The deposit is held in the real estate agent's trust account or the vendor's solicitor's trust account until settlement. The deposit forms part of the purchase price and is credited to the purchaser at settlement. If the purchaser defaults and the vendor terminates the contract, the vendor is typically entitled to forfeit the deposit and sue for any additional loss. Settlement is the final stage of the property transaction, at which the balance of the purchase price is paid and the legal title to the property is transferred to the purchaser. In most Australian states, settlement now occurs electronically through the PEXA (Property Exchange Australia) platform, which enables real estate lawyers and conveyancers to complete the transfer of land and the financial settlement simultaneously in a secure online workspace. A finance condition (also called a subject to finance clause) is commonly included in Australian property contracts where the purchaser requires a mortgage to fund the purchase. The finance condition gives the purchaser the right to terminate the contract if they are unable to obtain unconditional finance approval from a lender by the specified finance date. The purchaser must use reasonable endeavours to obtain finance approval and must notify the vendor of the outcome by the finance date. GST is generally not applicable to the sale of residential property in Australia, unless the property is a new residential premises or commercial residential premises (such as a new house and land package, a newly converted dwelling, or a serviced apartment). Where GST applies, the sale is a taxable supply under the A New Tax System (Goods and Services Tax) Act 1999 (Cth) and the vendor must issue a tax invoice. A margin scheme may be available to reduce the GST payable in certain circumstances. This template is suitable for the private sale of residential property in any Australian state or territory. Both vendor and purchaser should engage a licensed solicitor or conveyancer to review the contract before exchange, to ensure that all statutory requirements and necessary annexures specific to the applicable state are included.
Contract of Sale of Land (Australia)
A Contract of Sale of Land is the principal legally binding document used in every Australian residential property transaction to formalise the agreement between a vendor (seller) and a purchaser (buyer) for the transfer of real property. Once both parties have signed and exchanged the contract, it becomes enforceable under law, and neither party can withdraw without legal consequences. Australian law requires that a contract for the sale of land must be in writing to be enforceable — verbal agreements to sell land have no legal effect. Australian conveyancing operates under a regime of state-specific legislation. The primary statute governing the sale of land in New South Wales is the Conveyancing Act 1919 (NSW), supplemented by the Conveyancing (Sale of Land) Regulation 2022. In Victoria, the governing statute is the Sale of Land Act 1962 (VIC). In Queensland, property transactions are regulated by the Property Law Act 1974 (QLD) and the Property Occupations Act 2014 (QLD). Western Australia is governed by the Property Law Act 1969 (WA), South Australia by the Land and Business (Sale and Conveyancing) Act 1994 (SA), and Tasmania by the Conveyancing and Law of Property Act 1884 (TAS). Despite these jurisdictional differences, the core components of a contract of sale are broadly consistent across Australia. The deposit is one of the most important elements of an Australian property contract. The standard deposit is 10% of the purchase price, payable on exchange of contracts. The deposit is held in the trust account of the vendor's real estate agent or solicitor until settlement. If the purchaser defaults, the vendor is generally entitled to forfeit the deposit and sue for any additional loss. If the vendor defaults, the purchaser is entitled to the full return of the deposit and may also sue for damages, including loss of bargain damages where the property is sold for less than the contract price in a subsequent sale. The cooling-off period is a statutory right that protects purchasers in private treaty sales by allowing them to rescind the contract within a specified period without penalty (other than a 0.25% rescission fee). The cooling-off period varies by jurisdiction: five business days in New South Wales under section 66S of the Conveyancing Act 1919; three business days in Victoria under section 31 of the Sale of Land Act 1962; five business days in Queensland under the Property Occupations Act 2014; two business days in South Australia; and four business days in the Australian Capital Territory. No cooling-off period applies to properties sold at auction, or where the purchaser has signed a statutory waiver (such as a section 66W certificate in NSW or the equivalent cooling-off waiver in other states). Special conditions are commonly included in residential property contracts to address circumstances specific to the transaction. A finance condition (subject to finance) allows the purchaser to terminate the contract if they cannot obtain unconditional loan approval from a lender by the specified finance date. A building and pest inspection condition allows the purchaser to terminate if an inspection reveals significant defects above a nominated cost threshold. A subject to sale condition may be included where the purchaser's ability to complete the purchase depends on the sale of their existing property. Special conditions must be carefully drafted to avoid ambiguity and to clearly state the consequences of the condition not being met. Settlement is the final stage of the conveyancing transaction, at which the balance of the purchase price is paid and ownership of the land is transferred to the purchaser. In the majority of Australian states, settlement now occurs electronically through the PEXA (Property Exchange Australia) platform. Electronic settlement eliminates the need for a physical meeting at the bank or solicitor's office on settlement day, and the title documents are lodged for registration at the Land Titles Office simultaneously with the financial settlement. Stamp duty (now called transfer duty or land transfer duty in most states) is payable by the purchaser on the purchase of real property. The rate and calculation methodology differ between states, but duty is generally calculated on a sliding scale based on the dutiable value of the property. First home buyers may be eligible for reduced or exempted transfer duty under relevant state concession schemes. The purchaser's solicitor or conveyancer will advise on the applicable duty and arrange for its payment. Both the vendor and the purchaser should engage a licensed solicitor or conveyancer experienced in conveyancing in the relevant state before exchanging the Contract of Sale. The vendor's solicitor prepares the contract and annexes the required disclosure documents. The purchaser's solicitor reviews the contract, advises on any unusual terms or risks, arranges enquiries and searches, and manages the settlement process.
Vendor Disclosure Statement (Australia)
A Vendor Disclosure Statement is a mandatory legal document that a property vendor (seller) must provide to a prospective purchaser before the purchaser signs a contract for the sale of land in Australia. The purpose of vendor disclosure is to ensure that purchasers have access to all material information about the property — including its title, encumbrances, outgoings, planning restrictions, building permits, and other statutory matters — before they are legally bound by the contract. Vendor disclosure is a cornerstone of Australian conveyancing law and reflects the principle that property transactions must be conducted with full transparency. In Victoria, the vendor disclosure statement is formally known as a Section 32 Statement, named after section 32 of the Sale of Land Act 1962 (VIC). The Section 32 Statement is one of the most comprehensive mandatory disclosure documents in Australian property law. It must be provided to the purchaser before the contract is signed and must disclose: details of all mortgages and encumbrances registered on the title; all outgoings including council rates, water rates, land tax, and owners corporation levies; planning scheme information including applicable zoning and overlays; all building permits issued in the past seven years together with details of any certificates of final inspection or occupancy permits obtained; details of any owners corporation affecting the property; particulars of any notices or orders issued by any government authority; and any other material facts that may affect the purchaser's decision to purchase. If a Section 32 Statement is defective — meaning it omits required information or contains false or misleading information — the purchaser may be entitled to rescind the contract at any time before settlement, regardless of whether the cooling-off period has expired. This right to rescind for a defective vendor statement is a powerful protection for purchasers and a significant risk for vendors who fail to comply with their disclosure obligations. In New South Wales, the equivalent disclosure framework operates through the mandatory annexures that must be attached to the contract for sale under section 52A of the Conveyancing Act 1919 (NSW) and the Conveyancing (Sale of Land) Regulation 2022. Rather than a separate vendor's statement, NSW law requires the vendor to attach a current title search, a drainage diagram, a sewer service diagram, a section 10.7 planning certificate under the Environmental Planning and Assessment Act 1979, and copies of all documents creating easements, covenants, or other registered interests. If any required annexure is missing, the purchaser may rescind at any time before settlement. In Queensland, vendors of residential property are required to complete a Property Disclosure Statement under the Property Occupations Act 2014 (QLD), which requires disclosure of disputes with neighbours, pool safety certificates, environmental management registers, and other matters. In Western Australia and South Australia, similar disclosure obligations arise under the relevant property law and land business legislation. The disclosure obligations vary in scope and format between states, but the underlying principle is consistent: a vendor must not conceal or misrepresent material information about the property. Disclosure must extend not only to registered encumbrances but also to known structural defects, outstanding orders, environmental issues, and any other circumstances that would be material to a reasonable purchaser. Vendors must ensure that the information in their disclosure statement is current, accurate, and complete. Where circumstances change between the date of the disclosure statement and the date of settlement, vendors should notify their solicitor or conveyancer promptly so that updated disclosure can be made. Purchasers are strongly advised to engage a licensed solicitor or conveyancer to review the vendor's disclosure statement and the attached contract documents before signing.
Residential Tenancy Agreement (Australia)
Create a Residential Tenancy Agreement for any Australian state or territory. Covering landlord and tenant rights, rent, bond, condition report, maintenance obligations, break fees, and termination procedures in accordance with the NSW Residential Tenancies Act 2010, VIC Residential Tenancies Act 1997, QLD Residential Tenancies and Rooming Accommodation Act 2008, and equivalent state legislation.