Lease Amendment / Variation Agreement (Australia)
This Lease Amendment and Variation Agreement ("Amendment") is made on [Amendment Date] in [State/Territory], Australia.
1. PARTIES
1.1 Landlord: [Landlord Name], of [Landlord Address] ("Landlord").
1.2 Tenant: [Tenant Name], of [Tenant Address] ("Tenant").
The Landlord and the Tenant are collectively referred to in this Amendment as the "Parties".
2. BACKGROUND
2.1 The Landlord and the Tenant entered into a lease agreement dated [Original Lease Date] ("Original Lease") in respect of the premises situated at [Premises Address] ("Premises").
2.2 The Parties now wish to amend and vary certain terms of the Original Lease as set out in this Amendment.
2.3 The Parties confirm that, as at the date of this Amendment, the Original Lease remains in full force and effect and neither Party is in default under the Original Lease.
3. CONSIDERATION
In consideration of the mutual promises set out in this Amendment and other good and valuable consideration (the receipt and sufficiency of which each Party acknowledges), the Parties agree as follows:
4. EFFECTIVE DATE
This Amendment takes effect on [Effective Date] ("Effective Date"), unless a specific clause below specifies a different date for a particular amendment to take effect.
5. CONTINUATION OF ORIGINAL LEASE
5.1 Except as expressly amended by this Amendment, all terms and conditions of the Original Lease remain in full force and effect and are not varied by this Amendment.
5.2 In the event of any inconsistency between this Amendment and the Original Lease, the terms of this Amendment prevail to the extent of the inconsistency.
5.3 This Amendment and the Original Lease are to be read together and form a single agreement between the Parties in relation to the Premises. Any reference to 'the Lease' in either document means the Original Lease as amended by this Amendment.
5.4 Each Party confirms that, to the best of its knowledge, as at the date of this Amendment, the other Party is not in breach of the Original Lease.
6. GENERAL PROVISIONS
6.1 This Amendment is governed by the laws of [State/Territory], Australia.
6.2 This Amendment may only be further varied by a written agreement signed by all Parties.
6.3 Where the Original Lease has been registered on the title to the Premises, the Parties agree to take all steps necessary to register this Amendment (or a memorandum of this Amendment) on the title if required by applicable legislation or by either Party's financier.
6.4 Each Party must bear its own legal costs in connection with the preparation and execution of this Amendment, unless the Original Lease provides otherwise.
6.5 This Amendment may be executed in counterparts, each of which is an original, and all counterparts together constitute one instrument.
EXECUTION
This Lease Amendment / Variation Agreement is executed by the Parties on the date first written above.
LANDLORD
[Landlord Name]
Address: [Landlord Address]
TENANT
[Tenant Name]
Address: [Tenant Address]
Landlord
________________
Signature
Date: ________________
Tenant
________________
Signature
Date: ________________
What Is a Lease Amendment / Variation Agreement (Australia)?
A Lease Amendment / Variation Agreement in Australia grants a tenant the right to occupy residential premises and records the rent, bond, term, and the repair and notice obligations of landlord and tenant under the Real Property Act 1900 (NSW).
In Australia, lease amendments are used for both commercial and residential tenancies. Commercial lease amendments are governed primarily by contract law and, for retail tenancies, by the Retail Leases Acts applicable in each state — including the Retail Leases Act 1994 (NSW), the Retail Leases Act 2003 (VIC), the Retail Shop Leases Act 1994 (QLD), the Commercial Tenancy (Retail Shops) Agreements Act 1985 (WA), and the Retail and Commercial Leases Act 1995 (SA). Residential lease amendments are governed by the Residential Tenancies Acts of each state and territory.
Common uses for a lease amendment include varying the rent amount (for example, where the parties agree to a rent reduction or increase outside the normal review cycle), extending or shortening the lease term, changing the permitted use of the premises, modifying maintenance or repair obligations, adding or removing special conditions, varying the security deposit amount, or making any other mutually agreed change to the original lease terms.
A lease amendment must be executed by all parties who signed the original lease to be binding. Where a guarantor signed the original lease, the guarantor should also be a party to any amendment that increases the tenant's obligations, as a material variation of a guaranteed obligation may otherwise discharge the guarantor from liability under the guarantee.
The legal framework governing the Lease Amendment / Variation Agreement (Australia) in Australia draws on several key statutes and regulatory bodies. Under state and territory residential tenancies legislation, including the Residential Tenancies Act 1997 (Vic), Residential Tenancies Act 2010 (NSW), and equivalent Acts in other jurisdictions, tenancy tribunals (NCAT in NSW, VCAT in Victoria) adjudicate disputes. The Real Property Act 1900 (NSW) and Transfer of Land Act 1958 (Vic) govern property registration through state land registries. Section 52 of the Australian Consumer Law (Schedule 2, Competition and Consumer Act 2010) prohibits misleading conduct in property transactions. The Foreign Acquisitions and Takeovers Act 1975 (Cth) requires FIRB approval for foreign purchasers. Parties executing a Lease Amendment / Variation Agreement (Australia) in Australia should confirm the document reflects current law, including any amendments enacted since the original drafting date. The Real Property Act 1900 (NSW) sets the foundational requirements.
When Do You Need a Lease Amendment / Variation Agreement (Australia)?
A Lease Amendment Agreement is needed whenever a landlord and tenant agree to change any term of their existing lease during the lease period. Rather than terminating the existing lease and entering into a new one, a lease amendment is a more cost-effective and practical way to document agreed changes to specific terms.
You should use a lease amendment when the landlord and tenant agree to a rent reduction or increase that is not covered by the existing rent review mechanism; when the tenant wishes to change its business use and requires the permitted use clause to be varied; when the landlord agrees to take over or change maintenance obligations previously assigned to the tenant; when the parties wish to extend the lease term or add an option to renew that was not in the original lease; when the tenant wishes to install significant fit-out works that require changes to the make good obligations; when the COVID-19 Leasing Code of Conduct or state-based commercial tenancy relief legislation required formal variation of rent and other terms; or when the parties agree to any other change to the existing lease terms.
For retail leases, some amendments may also require compliance with mandatory disclosure requirements under the applicable Retail Leases Act. For example, if the amendment extends the term of a retail lease, the landlord may be required to provide an updated disclosure statement to the tenant before the amendment is signed. The parties should seek legal advice about disclosure obligations before executing a lease amendment for retail premises.
Parties in Australia should prepare a Lease Amendment / Variation Agreement (Australia) proactively rather than waiting for a dispute to arise. Courts interpret agreements based on the written terms rather than oral representations. Under state and territory residential tenancies legislation, including the Residential Tenancies Act 1997 (Vic), Residential Tenancies Act 2010 (NSW), and equivalent Acts in other jurisdictions, tenancy tribunals (NCAT in NSW, VCAT in Victoria) adjudicate disputes. The Real Property Act 1900 (NSW) and Transfer of Land Act 1958 (Vic) govern property registration through state land registries. Section 52 of the Australian Consumer Law (Schedule 2, Competition and Consumer Act 2010) prohibits misleading conduct in property transactions. The Foreign Acquisitions and Takeovers Act 1975 (Cth) requires FIRB approval for foreign purchasers. Where the transaction involves regulated activities, prior approval from the relevant authority may be required before execution.
What to Include in Your Lease Amendment / Variation Agreement (Australia)
A well-drafted Lease Amendment Agreement should clearly identify the original lease and the parties, specify with precision the terms being varied, state the effective date of the amendments, and confirm that all other terms of the original lease remain unchanged.
Identification of original lease: The amendment must clearly identify the original lease by reference to its date, the names of the parties, and the address of the leased premises. This confirms that the amendment is unambiguously linked to the correct lease document and avoids disputes about which agreement is being varied.
Parties: All parties who signed the original lease must sign the amendment for it to be binding. If the tenant is a company, the amendment should be executed in accordance with the Corporations Act 2001 (Cth) — either under the company's common seal or by two authorised signatories (two directors, or a director and a company secretary). Where the lease has a guarantor, legal advice should be obtained about whether the guarantor must also sign the amendment.
Amendments to rent: Any variation to the rent must state the current rent, the new rent, and the date from which the new rent applies. For retail leases, the amendment must comply with the rent review provisions of the applicable Retail Leases Act. For residential tenancies, the amendment must comply with the relevant Residential Tenancies Act regarding notice periods and prohibited rent increases during fixed terms.
Amendments to permitted use: A change to the permitted use must state both the current permitted use and the new permitted use with precision. The tenant should confirm that any new use is permitted under applicable planning and zoning laws before the amendment is executed.
Amendments to maintenance: Any change to maintenance or repair obligations should clearly state which specific provisions of the original lease are being replaced and what the new obligations are.
Effective date and registration: The amendment must state the date from which each variation takes effect. Where the lease has been registered on title under the Torrens title system, registration of the amendment may also be required to confirm the varied terms are effective against third parties including purchasers and mortgagees.
Additional compliance elements for a Lease Amendment / Variation Agreement (Australia) used in Australia include: Under state and territory residential tenancies legislation, including the Residential Tenancies Act 1997 (Vic), Residential Tenancies Act 2010 (NSW), and equivalent Acts in other jurisdictions, tenancy tribunals (NCAT in NSW, VCAT in Victoria) adjudicate disputes. The Real Property Act 1900 (NSW) and Transfer of Land Act 1958 (Vic) govern property registration through state land registries. Section 52 of the Australian Consumer Law (Schedule 2, Competition and Consumer Act 2010) prohibits misleading conduct in property transactions. The Foreign Acquisitions and Takeovers Act 1975 (Cth) requires FIRB approval for foreign purchasers. Forms-legal.com provides this template as a starting point for Australia-compliant documentation.
Cite this page
Reference this free template in an article, syllabus, or research note:
Forms Legal. (2026). Lease Amendment / Variation Agreement (Australia) (Australia) [Legal document template]. Forms Legal. https://forms-legal.com/australia/real-estate/leases/lease-amendment-agreement-australia
"Lease Amendment / Variation Agreement (Australia) (Australia)." Forms Legal, 2026, https://forms-legal.com/australia/real-estate/leases/lease-amendment-agreement-australia.
@misc{formslegal-lease-amendment-agreement-australia,
author = {{Forms Legal}},
title = {Lease Amendment / Variation Agreement (Australia) (Australia)},
year = {2026},
howpublished = {\url{https://forms-legal.com/australia/real-estate/leases/lease-amendment-agreement-australia}},
note = {Free legal document template. Based on Real Property Act 1900 (NSW)}
}Also available for these jurisdictions:
Frequently Asked Questions
Yes. For both commercial and residential leases in Australia, any variation to the terms of an existing lease should be recorded in writing and signed by all parties to be enforceable. This requirement flows from general contract law principles as well as specific legislative provisions. For commercial leases, the Statute of Frauds as adopted in Australian states requires that contracts relating to land (including leases and their variations) be evidenced in writing. For retail leases, the Retail Leases Act applicable in each state typically requires the lease and any amendments to be in writing. For residential tenancies, state Residential Tenancies Acts (such as the Residential Tenancies Act 2010 (NSW) and the Residential Tenancies Act 1997 (VIC)) require that any variation of the lease terms be agreed in writing by the landlord and tenant. A verbal agreement to vary lease terms is unlikely to be enforceable and creates significant uncertainty. A formal written lease amendment signed by all parties is always the recommended approach.
Whether rent can be varied during a fixed-term lease depends on the type of lease and the applicable legislation. For commercial and retail leases, rent can be varied mid-term by written agreement between the landlord and tenant, subject to any restrictions in the applicable Retail Leases Act. For example, the Retail Leases Act 1994 (NSW) and the Retail Leases Act 2003 (VIC) impose rules about the method and frequency of rent reviews, and any variation must be consistent with these requirements. For residential tenancies, the position is more restrictive. Under most Australian Residential Tenancies Acts, rent cannot be increased during the fixed term of a lease unless the original agreement specifically provides for the increase — for example, by specifying a fixed review formula. In New South Wales, under the Residential Tenancies Act 2010, rent can only be increased during a fixed term if the agreement specifies the amount of the increase or the method by which it is calculated. In Victoria, rent can be increased during a fixed term only if the agreement includes a term allowing for a rent increase. Any attempted mid-term rent increase that is not authorised by the original agreement or the applicable legislation is void.
The question of whether a lease amendment must be registered on title depends on the duration of the lease, the jurisdiction, and the nature of the amendments. Under the Real Property Act 1900 (NSW), the Transfer of Land Act 1958 (VIC), and equivalent Torrens title legislation in other states, a lease of more than three years must generally be registered on the certificate of title to be fully effective against third parties (such as a purchaser of the property). If the original lease was registered, a formal amendment to that lease that changes key terms should also be registered (or a memorandum of amendment filed) to ensure it is effective against third parties. For shorter leases, or where the amendment does not change terms that affect third parties, registration may not be strictly required. Parties to a registered lease should seek legal advice about registration obligations before executing an amendment, particularly where the amendment changes the term, the rent, or the premises description.
In Australian legal practice, the terms 'lease amendment', 'lease variation', and 'lease addendum' are often used interchangeably to refer to a document that modifies the terms of an existing lease. Technically, an amendment or variation agreement replaces specific existing clauses with new terms, while an addendum adds new terms to the lease without necessarily replacing existing clauses. However, the practical distinction is less important than ensuring that the document clearly identifies the original lease, specifies exactly which terms are being changed, and is signed by all parties. A well-drafted lease amendment will clearly state the original lease details, identify the clauses being varied, set out the new agreed terms, specify the effective date of the variations, and confirm that all other terms of the original lease remain unchanged. Courts will enforce a lease amendment that is clearly worded and executed by all parties, regardless of whether it is described as an amendment, a variation, or an addendum.
If a leased property is sold, the purchaser generally takes the property subject to the existing lease and any registered amendments to that lease. This is because a lease (particularly a registered lease) is an interest in land that binds successors in title under the Torrens title system applicable in all Australian states and territories. The incoming landlord (purchaser) steps into the shoes of the outgoing landlord and becomes bound by all terms of the lease, including any amendments, from the date of settlement. For this reason, it is important that any lease amendment is properly executed and, where necessary, registered on title before the property is sold. If an amendment was not registered and the purchaser took the property without notice of the amendment, there is a risk that the amendment may not be binding on the purchaser in some circumstances. Both vendors and purchasers should require that all lease amendments are disclosed and reviewed as part of the conveyancing due diligence process.
This template is provided for informational purposes only and does not constitute legal advice. Laws vary by jurisdiction and change over time. Consult a qualified attorney for advice specific to your situation.Full disclaimer
Found an error? Let us knowRelated Documents
You may also find these documents useful:
Commercial Lease Agreement (Australia)
Create a comprehensive Australian Commercial Lease Agreement covering permitted use, rent and GST, CPI and market rent reviews, outgoings, bank guarantee, make good obligations, assignment conditions, insurance requirements, and option to renew. Compliant with state-specific Retail Leases Acts (NSW, VIC, QLD, WA, SA) and the GST Act 1999.
Lease Renewal Agreement (Australia)
A Lease Renewal Agreement is a written document signed by a landlord and tenant that extends an existing residential tenancy for a further period on agreed terms. In Australia, the rules governing lease renewals — including the rights of each party at the end of a fixed-term agreement, the notice required, and the effect of renewal on the bond and other conditions — are governed by the residential tenancy legislation applicable in each state and territory. When a fixed-term tenancy agreement expires, several outcomes are possible. If neither party gives notice, the tenancy generally continues as a periodic tenancy (typically week to week or month to month) under the same terms as the original agreement, subject to any modifications required by the applicable Residential Tenancies Act. Alternatively, the landlord and tenant may agree to enter into a new fixed-term agreement — either a fresh tenancy agreement or a shorter renewal agreement — which records the agreed new rent, the new term, and any changes to the conditions of the original agreement. A written lease renewal agreement is preferable to simply allowing the tenancy to continue on a periodic basis, because it gives both parties certainty about the duration of the tenancy and the rent payable. For the landlord, a fixed-term renewal provides security of income and reduces the risk of the tenant giving short notice. For the tenant, a fixed-term renewal provides security of tenure and protection against arbitrary increases in rent during the renewal period (subject to the applicable legislation's restrictions). Under the Residential Tenancies Act 2010 (NSW), the Residential Tenancies Act 1997 (VIC), and the Residential Tenancies and Rooming Accommodation Act 2008 (QLD), a lease renewal is treated as a new fixed-term agreement for the purposes of the Act. The standard terms implied by the Act apply to the renewal, and any term of the renewal agreement that is inconsistent with the Act is void to the extent of the inconsistency. This means that mandatory provisions — such as the bond lodgement requirements, the landlord's maintenance obligations, and the rent increase restrictions — apply to the renewal in the same way as they applied to the original tenancy. Regarding the bond, the bond paid at the start of the original tenancy continues to be held by the relevant state authority — such as NSW Fair Trading, the Residential Tenancies Bond Authority (RTBA) in Victoria, or the Residential Tenancies Authority (RTA) in Queensland — for the duration of the renewal. The landlord generally does not need to lodge additional bond money unless the rent has increased to a level that would justify a higher bond amount under the applicable Act. In NSW, the maximum bond is equivalent to four weeks' rent, so if the new rent is significantly higher, the landlord may be entitled to request a bond top-up. If a rent increase is included in the lease renewal, the landlord must comply with the notice requirements of the applicable Act. In most Australian states, at least 60 days' written notice is required before a rent increase takes effect, and rent may not be increased more than once in any 12-month period. A lease renewal document should not be used as a mechanism to impose a rent increase without first ensuring that the required notice has been given. For properties in New South Wales, landlords should also be aware that Part 3 of the Residential Tenancies Act 2010 sets out the mandatory terms that apply to all residential tenancy agreements — including renewals — such as the landlord's obligation to maintain the premises in a reasonable state of repair and the tenant's obligation to keep the premises reasonably clean. This lease renewal agreement template is designed to help landlords and tenants in all Australian states and territories document the renewal of a residential tenancy in a clear, legally sound manner. It should be adapted to reflect the specific requirements of the state or territory in which the property is located, and parties should seek advice from their state's tenants advisory service or a solicitor if they have questions about their rights and obligations under the applicable legislation.
Residential Tenancy Agreement (Australia)
Create a legally compliant Residential Tenancy Agreement for any Australian state or territory. Covering landlord and tenant rights, rent, bond, condition report, maintenance obligations, break fees, and termination procedures in accordance with the NSW Residential Tenancies Act 2010, VIC Residential Tenancies Act 1997, QLD Residential Tenancies and Rooming Accommodation Act 2008, and equivalent state legislation.
Lease Guarantee / Guarantor Agreement (Australia)
A Lease Guarantee and Guarantor Agreement is a legal document in which a third party (the guarantor) agrees to be personally liable for a tenant's obligations under a lease if the tenant fails to meet those obligations. Guarantees are widely used in Australian commercial, retail, and residential leasing as security for landlords, particularly where the tenant is a company, a new business, or a person without a strong financial track record. Australian landlords routinely require directors of company tenants to provide personal guarantees as a condition of entering into a lease.
Commercial Sublease Agreement (Australia)
Create an Australian Commercial Sublease Agreement for the subletting of commercial or retail premises. Covers head lease details, head landlord consent, permitted use, sublease term, rent and GST, outgoings, bank guarantee or security deposit, make good obligations, Subtenant’s compliance with head lease, and Retail Leases Act compliance across all states and territories.