Skip to main content

Business Contract (Australia)

Business Contract

General Commercial Agreement — Australia

This Business Contract ('Contract') is entered into on [Agreement Date] between:

[Party One Name] (ABN [Party One ABN]) of [Party One Address] ('[Party One Role]'); and

[Party Two Name] (ABN [Party Two ABN]) of [Party Two Address] ('[Party Two Role]').

Together referred to as the 'Parties'.

1. SCOPE OF CONTRACT

1.1 Subject matter: [Contract Subject]

1.2 This Contract commences on [Contract Start Date] and continues until [Contract End Date], unless terminated earlier in accordance with clause 8.

2. CONSIDERATION

2.1 In consideration of the [Party One Role] performing its obligations under this Contract, the [Party Two Role] agrees to pay: [Consideration]

2.2 All amounts payable under this Contract are expressed exclusive of GST unless stated otherwise. Where a supply under this Contract is a taxable supply under the A New Tax System (Goods and Services Tax) Act 1999 (Cth), GST at 10% is payable by the recipient in addition to the stated amount, on receipt of a valid tax invoice.

3. OBLIGATIONS

3.1 [Party One Role] obligations: [Party One Obligations]

3.2 [Party Two Role] obligations: [Party Two Obligations]

3.3 Each party must perform its obligations with reasonable care and skill, in a timely manner, and in compliance with all applicable Australian laws and regulations.

4. WARRANTIES

4.1 Each party warrants that:

  • it has the legal capacity, power, and authority to enter into and perform this Contract;
  • this Contract constitutes a valid and binding obligation enforceable against it;
  • it holds all licences, registrations, and approvals required to perform its obligations; and
  • performance of this Contract will not breach any other agreement to which it is a party.

5. LIMITATION OF LIABILITY

5.1 Subject to clause 5.3, the total aggregate liability of either party to the other under or in connection with this Contract (whether in contract, tort, statute, or otherwise) is limited to: [Liability Cap].

5.2 Neither party is liable to the other for any indirect, consequential, special, punitive, or exemplary loss or damage (including loss of revenue, loss of profits, loss of business, or loss of data), whether arising from breach of contract, tort, negligence, or otherwise, even if advised of the possibility of such loss.

5.3 The liability limitation in clause 5.1 does not apply to: (a) death or personal injury caused by negligence; (b) fraud or wilful misconduct; (c) liability that cannot be excluded under the Australian Consumer Law (Schedule 2, Competition and Consumer Act 2010 (Cth)).

6. AUSTRALIAN CONSUMER LAW

6.1 Nothing in this Contract excludes, restricts, or modifies any right, guarantee, or remedy conferred on a party under the Australian Consumer Law that cannot be excluded, restricted, or modified by agreement.

6.2 The parties acknowledge that the unfair contract terms regime in Part 2-3 of the Australian Consumer Law may apply to this Contract if it is a standard form contract and one party is a small business (annual turnover under $10 million or fewer than 100 employees).

7. CONFIDENTIALITY

7.1 Each party must keep the other party's confidential information ('Confidential Information') strictly confidential [Confidentiality Term].

7.2 'Confidential Information' means all information disclosed by one party to the other in connection with this Contract that is designated as confidential or would reasonably be understood as confidential.

7.3 A party may disclose Confidential Information to its employees, contractors, or advisers on a need-to-know basis, provided those persons are bound by equivalent confidentiality obligations.

7.4 These confidentiality obligations do not apply to information that is publicly available, was already known to the receiving party, or is required to be disclosed by law or a court order.

8. INTELLECTUAL PROPERTY

8.1 IP ownership under this Contract: [IP Ownership].

8.2 Each party retains ownership of its pre-existing intellectual property. Nothing in this Contract transfers ownership of pre-existing IP.

8.3 Each party grants the other a limited, non-exclusive licence to use its pre-existing intellectual property solely to the extent necessary to perform its obligations under this Contract.

9. TERMINATION

9.1 Either party may terminate this Contract for convenience by giving [Termination Notice] to the other party.

9.2 Either party may terminate this Contract immediately by written notice if the other party: (a) commits a material breach of this Contract and fails to remedy the breach within 14 days of receiving written notice requiring it to do so; or (b) becomes insolvent, bankrupt, or has a receiver, administrator, or liquidator appointed.

9.3 On termination, all amounts owing under this Contract become immediately due and payable. Termination does not affect any rights or liabilities that have accrued before the termination date.

10. GENERAL

10.1 Governing law: This Contract is governed by and construed in accordance with the laws of [Governing State], Australia. Each party irrevocably submits to the non-exclusive jurisdiction of the courts of [Governing State].

10.2 Dispute resolution: The parties must attempt to resolve any dispute by good-faith negotiation before commencing litigation. If negotiation fails within 20 business days, the dispute will be referred to mediation before a mediator agreed by the parties or appointed by the relevant dispute resolution authority.

10.3 Entire agreement: This Contract constitutes the entire agreement between the parties with respect to its subject matter and supersedes all prior negotiations, representations, and agreements.

10.4 Variation: This Contract may only be varied by written agreement signed by both parties.

10.5 Severance: If any provision of this Contract is unenforceable, it may be severed without affecting the remaining provisions.

10.6 Electronic execution: This Contract may be executed electronically under the Electronic Transactions Act 1999 (Cth).

EXECUTED as a contract on [Agreement Date].

{{partyOneRole}}

________________

Signature

Date: ________________

{{partyTwoRole}}

________________

Signature

Date: ________________

Maintained by Vladislav Sergienko, Founder·Template last modified: ·Report an error

What Is a Business Contract (Australia)?

A Business Contract in Australia records the business arrangement agreed between the parties and the specific obligations each side accepts, forming a binding agreement under the Corporations Act 2001 (Cth).

Australian business contracts are governed by the common law of contract — derived from the common law tradition inherited from England, adapted and developed by Australian courts including the High Court of Australia. The common law requires offer, acceptance, consideration, certainty of terms, intention to create legal relations, and capacity. Where the contract involves the supply of goods or services, the Competition and Consumer Act 2010 (Cth) and the Australian Consumer Law (ACL) overlay additional requirements and implied terms that cannot be excluded for consumer transactions.

For B2B (business-to-business) contracts, Australian law generally respects the freedom of the parties to agree their own terms, subject to the mandatory provisions of the ACL (including the prohibition on misleading or deceptive conduct and the unfair contract terms regime) and any relevant industry-specific regulation.

A well-drafted Australian Business Contract does more than simply document what the parties have agreed — it also allocates risk between them (through limitation of liability clauses, indemnities, and warranties), protects confidential information, preserves intellectual property ownership, provides mechanisms for variation and dispute resolution, and specifies the circumstances in which the contract can be terminated.

The Australia Business Contract (Australia) template provides a thorough general-purpose Business Contract for use in Australian commercial transactions, covering all the key legal and commercial provisions required for a binding and enforceable agreement.

The legal framework governing the Business Contract (Australia) in Australia draws on several key statutes and regulatory bodies. Under the Corporations Act 2001 (Cth), the Australian Securities and Investments Commission (ASIC) regulates companies and financial services. Section 127 of the Corporations Act 2001 governs company execution of documents. The Australian Competition and Consumer Commission (ACCC) enforces the Competition and Consumer Act 2010 (Cth). The Australian Taxation Office (ATO) administers the Goods and Services Tax under the A New Tax System (Goods and Services Tax) Act 1999. The Federal Court of Australia and Supreme Courts of each state have jurisdiction over corporate disputes. Parties executing a Business Contract (Australia) in Australia should confirm the document reflects current law, including any amendments enacted since the original drafting date. The Corporations Act 2001 (Cth) sets the foundational requirements.

When Do You Need a Business Contract (Australia)?

A Business Contract is appropriate for any commercial transaction or ongoing business relationship that involves obligations, payment, or risk that the parties wish to document and enforce. Specific situations include:

New business engagements: Any time a business begins a significant new commercial relationship — whether as a supplier of goods, a provider of services, a licensee, or in any other commercial capacity — a written business contract should be in place before work begins or goods are delivered.

Repeated or ongoing transactions: Where two businesses regularly deal with each other, a master business contract (sometimes called a master services agreement) provides a standing legal framework for all transactions, supplemented by individual purchase orders or statements of work.

High-value transactions: For any transaction involving a significant financial commitment — above, say, $5,000-$10,000 — a written contract provides protection that is disproportionately valuable compared to the cost of preparing it.

Custom deliverables: Where one party is creating custom goods, software, content, or other deliverables for another, a written contract specifying the requirements, acceptance criteria, and IP ownership is essential.

Where verbal agreement is insufficient: If a business deal has been done 'on a handshake' or by email exchange, formalising the arrangement in a written business contract reduces the risk of later disputes about what was actually agreed.

Regulated industries: In regulated industries such as financial services, healthcare, construction, and food production, business contracts may need to incorporate specific compliance obligations (such as data protection provisions, workplace health and safety requirements, and industry-specific standards).

With new business partners: When entering a new business relationship with a party you have not previously dealt with, a written contract establishes clear expectations and provides legal recourse if they fail to perform.

Parties in Australia should prepare a Business Contract (Australia) proactively rather than waiting for a dispute to arise. Courts interpret agreements based on the written terms rather than oral representations. Under the Corporations Act 2001 (Cth), the Australian Securities and Investments Commission (ASIC) regulates companies and financial services. Section 127 of the Corporations Act 2001 governs company execution of documents. The Australian Competition and Consumer Commission (ACCC) enforces the Competition and Consumer Act 2010 (Cth). The Australian Taxation Office (ATO) administers the Goods and Services Tax under the A New Tax System (Goods and Services Tax) Act 1999. The Federal Court of Australia and Supreme Courts of each state have jurisdiction over corporate disputes. Where the transaction involves regulated activities, prior approval from the relevant authority may be required before execution.

What to Include in Your Business Contract (Australia)

A well-drafted Australian Business Contract should include the following key elements.

Parties: The full legal names, ABNs/ACNs, and addresses of each contracting party. Using the correct legal name (including 'Pty Ltd' or 'Ltd') is important for enforceability and for any court proceedings.

Scope of services or goods: A precise description of what each party is obliged to provide or do. This is the core of the contract and should leave no ambiguity about the obligations of each side.

Consideration: The price, fee, or other value to be exchanged. For service contracts, this includes whether fees are fixed, hourly, or milestone-based, and the payment schedule. GST treatment should be expressly addressed.

Obligations and performance standards: The standard to which each party must perform — for example, 'due care and skill', compliance with applicable Australian standards, or specific key performance indicators.

Warranties: Representations made by each party about their capacity, authority, and the quality of what they are providing. These are important because breach of warranty gives the innocent party a right to claim damages.

Limitation of liability: Caps on the financial liability of each party for breach, which may be limited to the contract value, to direct losses only (excluding consequential losses), or to amounts covered by insurance. Must comply with the ACL.

Confidentiality: Obligations to keep the other party's confidential information secret, particularly important for contracts involving access to business plans, financial information, or technical know-how.

Intellectual property: Clarification of who owns IP created or contributed in the course of the contract, and any licences granted.

Termination: The circumstances in which either party can bring the contract to an end — for cause (breach, insolvency), for convenience (on notice), or on the occurrence of a specified event.

Dispute resolution and governing law: The method of resolving disputes (negotiation, mediation, arbitration, litigation) and the governing Australian state or territory law.

Additional compliance elements for a Business Contract (Australia) used in Australia include: Under the Corporations Act 2001 (Cth), the Australian Securities and Investments Commission (ASIC) regulates companies and financial services. Section 127 of the Corporations Act 2001 governs company execution of documents. The Australian Competition and Consumer Commission (ACCC) enforces the Competition and Consumer Act 2010 (Cth). The Australian Taxation Office (ATO) administers the Goods and Services Tax under the A New Tax System (Goods and Services Tax) Act 1999. The Federal Court of Australia and Supreme Courts of each state have jurisdiction over corporate disputes. Forms-legal.com provides this template as a starting point for Australia-compliant documentation.

Cite this page

Reference this free template in an article, syllabus, or research note:

APA

Forms Legal. (2026). Business Contract (Australia) (Australia) [Legal document template]. Forms Legal. https://forms-legal.com/australia/business/contracts/business-contract-australia

MLA

"Business Contract (Australia) (Australia)." Forms Legal, 2026, https://forms-legal.com/australia/business/contracts/business-contract-australia.

BibTeX
@misc{formslegal-business-contract-australia,
  author       = {{Forms Legal}},
  title        = {Business Contract (Australia) (Australia)},
  year         = {2026},
  howpublished = {\url{https://forms-legal.com/australia/business/contracts/business-contract-australia}},
  note         = {Free legal document template. Based on Corporations Act 2001 (Cth)}
}

Also available for these jurisdictions:

Frequently Asked Questions

Based on Corporations Act 2001 (Cth) — Template last modified June 2026Verify the source →

This template is provided for informational purposes only and does not constitute legal advice. Laws vary by jurisdiction and change over time. Consult a qualified attorney for advice specific to your situation.Full disclaimer

Found an error? Let us know

Related Documents

You may also find these documents useful:

Supplier Agreement (Australia)

Establish clear terms with your suppliers using this Australian Supplier Agreement, compliant with the Competition and Consumer Act 2010 (Cth), Australian Consumer Law, and the Unfair Contract Terms regime. Covers supply of goods or services, pricing, delivery, quality standards, payment terms, warranties, indemnities, and termination. Suitable for B2B supply chains, product procurement, and service supply arrangements.

Sales Contract (Australia)

Create a binding Sales Contract for the purchase and sale of goods in Australia, compliant with the Competition and Consumer Act 2010 (Cth) and state Sale of Goods Acts. Covers goods description, purchase price, payment terms, delivery obligations, risk and title transfer, warranties, and dispute resolution. Suitable for B2B and commercial sales transactions involving physical goods.

Consultancy Agreement (Australia)

Create a professional Consultancy Agreement for Australia. Covers scope of services, fixed or hourly fees, GST, expense reimbursement, IP ownership, confidentiality, liability cap, professional indemnity insurance, and Australian Consumer Law compliance. Suitable for all states and territories.

Independent Contractor Agreement (Australia)

Create a legally compliant Independent Contractor Agreement for Australia. Covers ABN requirements, sham contracting protections, GST, IP ownership, WHS obligations, and the multi-factor contractor test under Fair Work Act 2009. Suitable for all states and territories including NSW, VIC, QLD, WA, SA, and ACT.

Heads of Agreement (Australia)

Create an Australian Heads of Agreement (HOA) reflecting the three categories of preliminary agreement identified by the High Court of Australia in Masters v Cameron (1955) 91 CLR 353. Covers binding vs non-binding provisions, subject to contract clauses, good faith negotiation obligations, exclusivity periods, confidentiality, conditions precedent (including due diligence and regulatory approvals), costs allocation, and a long stop date. Suitable for mergers and acquisitions, joint ventures, distribution arrangements, licensing deals, and other commercial transactions in all Australian states and territories.