---
title: "Working at Heights Risk Assessment (Australia)"
url: "https://forms-legal.com/australia/employment/health-safety/working-at-heights-risk-assessment-australia"
description: "A Working at Heights Risk Assessment in Australia records the hazards, risks, controls, or incident details for a workplace activity to support a safe system of work under the Fair Work Act 2009 (Cth)."
language: "en"
jurisdiction: "Australia"
category: "Employment / Health & Safety"
primaryStatute: "Fair Work Act 2009 (Cth)"
dateModified: "2026-10-29"
maintainer: "Vladislav Sergienko, founder (not a lawyer)"
---

# Working at Heights Risk Assessment (Australia)

- Australia · Employment / Health & Safety
- Legal basis: Fair Work Act 2009 (Cth)

## What Is a Working at Heights Risk Assessment (Australia)?

A Working at Heights Risk Assessment in Australia records the hazards, risks, controls, or incident details for a workplace activity to support a safe system of work under the Fair Work Act 2009 (Cth).

The legal framework governing the Working at Heights Risk Assessment (Australia) in Australia draws on several key statutes and regulatory bodies. Under the Fair Work Act 2009 (Cth), the Fair Work Commission (FWC) adjudicates workplace disputes. Section 394 of the Fair Work Act 2009 governs unfair dismissal claims. The Fair Work Ombudsman (FWO) enforces compliance with the National Employment Standards (NES). The Privacy Act 1988 (Cth) and Australian Privacy Principles (APPs) govern personal data handling. The Australian Taxation Office (ATO) administers PAYG withholding and superannuation guarantee obligations under the Superannuation Guarantee (Administration) Act 1992. Parties executing a Working at Heights Risk Assessment (Australia) in Australia should confirm the document reflects current law, including any amendments enacted since the original drafting date. The Fair Work Act 2009 (Cth) sets the foundational requirements.

## When Do You Need a Working at Heights Risk Assessment (Australia)?

A working at heights risk assessment is required before any work at height commences where a fall is likely to cause injury. Under reg 78 of the WHS Regulation 2017 (Cth), the PCBU must manage the risk of a fall from one level to another. The assessment must be conducted before workers access an elevated work area for the first time on a project, when the nature of the work changes (e.g., from interior fit-out to external roof work), when site conditions change (e.g., removal of edge protection during material delivery), when new fall hazards are identified, following any fall or near-miss incident, and when the current controls are found to be inadequate. The assessment must also be reviewed whenever there is a change in the work, the site conditions, or the workers performing the work, as required by reg 84 of the WHS Regulation 2017 (Cth).

Parties in Australia should prepare a Working at Heights Risk Assessment (Australia) proactively rather than waiting for a dispute to arise. Under the Fair Work Act 2009 (Cth), the Fair Work Commission (FWC) adjudicates workplace disputes. Section 394 of the Fair Work Act 2009 governs unfair dismissal claims. The Fair Work Ombudsman (FWO) enforces compliance with the National Employment Standards (NES). The Privacy Act 1988 (Cth) and Australian Privacy Principles (APPs) govern personal data handling. The Australian Taxation Office (ATO) administers PAYG withholding and superannuation guarantee obligations under the Superannuation Guarantee (Administration) Act 1992.

## What to Include in Your Working at Heights Risk Assessment (Australia)

A compliant working at heights risk assessment under the WHS Regulation 2017 (Cth) Part 4.4 must include: site and organisation identification; a detailed description of the work at height including heights and fall distances, duration, and workers involved; identification of all fall hazards including unprotected edges, holes, surface hazards, access/egress risks, and environmental factors; a risk rating (likelihood x consequence); whether the work constitutes high-risk construction work under reg 291 and whether a SWMS is required under reg 299; existing controls and their adequacy; fall prevention control measures across the hierarchy from elimination through to fall arrest; anchor point design certification under AS/NZS 1891.4; fall arrest equipment inspection records under AS/NZS 1891.1; scaffolding or edge protection compliance with AS/NZS 4994.1; a specific rescue plan addressing harness suspension trauma risk; an action plan with responsible persons and timeframes; and sign-off by the assessor and an approving officer.

Additional compliance elements for a Working at Heights Risk Assessment (Australia) used in Australia include: Under the Fair Work Act 2009 (Cth), the Fair Work Commission (FWC) adjudicates workplace disputes. Section 394 of the Fair Work Act 2009 governs unfair dismissal claims. The Fair Work Ombudsman (FWO) enforces compliance with the National Employment Standards (NES). The Privacy Act 1988 (Cth) and Australian Privacy Principles (APPs) govern personal data handling. The Australian Taxation Office (ATO) administers PAYG withholding and superannuation guarantee obligations under the Superannuation Guarantee (Administration) Act 1992.

## Sources & Citations

- [Fair Work Act 2009 (Cth)](https://www.legislation.gov.au/)

## Frequently Asked Questions

### What are the legal requirements for managing fall risks in Australia?

The primary legal requirements for managing fall risks in Australia are found in Part 4.4 of Chapter 4 of the Work Health and Safety Regulation 2017 (Cth). Regulation 78 requires the PCBU to manage the risk of a person falling from one level to another or into a hole where a fall is likely to cause injury. Regulation 79 requires the PCBU to ensure, so far as reasonably practicable, that work involving fall risk is done on the ground or on a solid construction (elimination). Regulation 80 sets out the hierarchy of fall prevention controls. Regulation 82 requires emergency and rescue procedures to be in place. For construction sites, reg 291 designates work involving a risk of falling more than 2 metres as 'high-risk construction work', and reg 299 requires a Safe Work Method Statement (SWMS) before such work commences.

### When is a Safe Work Method Statement (SWMS) required for work at heights?

Under reg 291 of the Work Health and Safety Regulation 2017 (Cth), construction work that involves a risk of a person falling more than 2 metres is 'high-risk construction work'. Under reg 299, the principal contractor must require that a Safe Work Method Statement (SWMS) is prepared before high-risk construction work commences. The SWMS must identify the type of high-risk construction work, specify the health and safety hazards and risks arising from the work, and describe the control measures to be implemented. Workers must be briefed on the SWMS and must not commence the high-risk construction work until they have been briefed. The working at heights risk assessment is the foundation document that informs the SWMS. Under Australia law, Fair Work Act 2009 (Cth), parties should seek independent legal advice from a qualified lawyer to confirm compliance with all applicable requirements. Under the Fair Work Act 2009 (Cth), the Fair Work Commission (FWC) adjudicates workplace disputes. Section 394 of the Fair Work Act 2009 governs unfair dismissal claims.

### What is the hierarchy of fall prevention controls in Australia?

The hierarchy of fall prevention controls under regs 79–80 of the Work Health and Safety Regulation 2017 (Cth) and the Safe Work Australia Code of Practice: Managing the Risk of Falls at Workplaces is: (1) Elimination — do the work on the ground or on a solid construction; (2) Passive fall prevention measures — scaffolding, guardrails, edge protection (AS/NZS 4994.1), elevating work platforms, covers over holes and openings (these prevent workers from reaching a fall edge); (3) Work positioning systems — travel restraint systems (connected to an anchor point so the worker cannot reach the fall edge), industrial rope access; and (4) Fall arrest systems (last resort) — full-body harness (AS/NZS 1891.1) with energy-absorbing lanyard or self-retracting lifeline, connected to a certified anchor point rated to minimum 15 kN (AS/NZS 1891.4). Fall arrest systems must be supplemented with a rescue plan.

### What anchor point requirements apply to fall arrest systems in Australia?

Under AS/NZS 1891.4:2009 (industrial fall-arrest systems — selection, use, and maintenance), anchor points used for fall arrest systems in Australia must be capable of withstanding a minimum force of 15 kN for a single-person system, or 21 kN for a two-person system. Anchor points must be designed by a competent person (typically a structural engineer or a person with equivalent qualifications) and installed in accordance with the design. A certificate of compliance should be issued for each anchor point confirming it meets the required load capacity. Workers must not use an anchor point unless it has been inspected, certified, and clearly marked as fit for use. Improvised anchor points (e.g., tying a lanyard to a purlin without engineering assessment) are prohibited. Under Australia law, Fair Work Act 2009 (Cth), parties should seek independent legal advice from a qualified lawyer to confirm compliance with all applicable requirements. Under the Fair Work Act 2009 (Cth), the Fair Work Commission (FWC) adjudicates workplace disputes. Section 394 of the Fair Work Act 2009 governs unfair dismissal claims.

### Why is a rescue plan mandatory when using fall arrest harnesses?

A rescue plan is mandatory when fall arrest systems are used because of the risk of harness suspension trauma (also called suspension syndrome or orthostatic intolerance). A worker who is suspended in a full-body harness after a fall — even without sustaining a significant impact injury — may suffer loss of consciousness within 5–15 minutes due to reduced blood flow to the brain caused by the harness leg straps restricting venous return. If the worker is not rescued promptly, suspension trauma can be fatal. Regulation 82 of the WHS Regulation 2017 (Cth) requires the PCBU to require that emergency and rescue procedures are in place for a fall from height. Every working at heights plan must include a specific, practical, and promptly executable rescue procedure that does not create additional casualties.

### What certifications do workers need to work at heights in Australia?

Australian WHS law does not prescribe a universal mandatory certification for all work at heights — requirements vary depending on the type of work and the controls used. However, several certifications are common and often required by site rules and PCBUs: the Construction Induction Training (White Card, reg 318 of the WHS Regulation 2017 (Cth)) is required for all construction workers; a 'Working at Heights' competency certificate issued by a registered training organisation (RTO) is required by most principal contractors and is established standards; for high-risk work involving scaffolding (including erecting, altering, and dismantling scaffolding above 4 metres), a high-risk work licence under Chapter 6 of the WHS Regulation 2017 (Cth) is required. Operators of elevated work platforms (EWPs) must also hold the appropriate EWP operator certificate. All fall arrest equipment users should be trained in pre-use inspection, proper donning and adjustment, and rescue procedures.

Fillable version (PDF or Word): [Download the free template](https://forms-legal.com/australia/employment/health-safety/working-at-heights-risk-assessment-australia)

General information, not legal advice — see our [accuracy & editorial policy](https://forms-legal.com/accuracy-policy). Confirm the cited law is current before relying on it.
