---
title: "Manual Task Risk Assessment (Australia)"
url: "https://forms-legal.com/australia/employment/health-safety/au-manual-handling-assessment"
description: "A Manual Task Risk Assessment in Australia records the hazards, risks, controls, or incident details for a workplace activity to support a safe system of work under the Fair Work Act 2009 (Cth)."
language: "en"
jurisdiction: "Australia"
category: "Employment / Health & Safety"
primaryStatute: "Fair Work Act 2009 (Cth)"
dateModified: "2026-06-05"
maintainer: "Vladislav Sergienko, founder (not a lawyer)"
---

# Manual Task Risk Assessment (Australia)

- Australia · Employment / Health & Safety
- Legal basis: Fair Work Act 2009 (Cth)

## What Is a Manual Task Risk Assessment (Australia)?

A Manual Task Risk Assessment in Australia records the hazards, risks, controls, or incident details for a workplace activity to support a safe system of work under the Fair Work Act 2009 (Cth).

A Manual Task Risk Assessment is a systematic document used to identify the hazardous manual task risk factors present in a specific work task, evaluate the level of risk of musculoskeletal disorder (MSD), and determine the control measures required to eliminate or minimise that risk. It is a mandatory component of workplace health and safety management under Australian law and is one of the most important tools for preventing musculoskeletal injuries — consistently the most common and costly category of workplace injury in Australia.

**Safe Work Australia** data shows that body stressing (which includes manual handling) accounts for approximately 37% of all serious workers' compensation claims in Australia, making it the single largest mechanism of workplace injury. The direct and indirect costs of manual handling injuries — including workers' compensation premiums, lost productivity, replacement staff, rehabilitation, and potential regulatory penalties — represent a significant financial burden on Australian businesses.

The legislative framework governing hazardous manual tasks in Australia is established by **regulations 60 to 68** of the **Work Health and Safety Regulation 2017 (Cth)** (WHS Regulation), made under the **Work Health and Safety Act 2011 (Cth)** (WHS Act). **Regulation 60** defines a "hazardous manual task" as a task that requires a person to lift, lower, push, pull, carry, move, hold, or restrain any person, animal, or thing involving one or more of the following risk factors: repetitive or sustained force; high or sudden force; repetitive movement; sustained or awkward posture; or exposure to vibration.

**Regulation 61** requires the person conducting a business or undertaking (PCBU) to identify hazardous manual tasks that are carried out, or are to be carried out, as part of the work. **Regulation 62** requires the PCBU to manage the risk of MSD associated with a hazardous manual task by eliminating the risk so far as is reasonably practicable, or if elimination is not reasonably practicable, minimising the risk using the **hierarchy of controls**: substitution, isolation, engineering controls, administrative controls, and personal protective equipment.

The **Safe Work Australia Code of Practice: Hazardous Manual Tasks** (the Code) is approved under **section 274** of the WHS Act and provides detailed practical guidance on identifying, assessing, and controlling hazardous manual task risks. The Code is admissible in WHS proceedings as evidence of what is known about the hazard and the expected standard of risk management. Following the Code is the most straightforward way for a PCBU to demonstrate compliance with the WHS Regulation.

The Code identifies **five key biomechanical risk factors** for musculoskeletal disorder:

1. **Forceful exertions** — lifting, lowering, pushing, pulling, carrying, holding, or gripping with significant force
2. **Repetitive movements** — performing the same or similar movements repeatedly over a sustained period
3. **Sustained or awkward postures** — maintaining fixed positions or working in postures that place stress on the body (bending, twisting, reaching, overhead work, kneeling, squatting)
4. **Vibration** — whole-body vibration from vehicles or machinery, and hand-arm vibration from power tools
5. **Characteristics of objects handled** — heavy, bulky, unstable, difficult to grip, requiring the worker to adopt awkward postures

The presence of **multiple risk factors in combination** significantly increases the probability of musculoskeletal injury. A task that involves both heavy lifting and awkward postures, for example, presents a much higher risk than either factor alone.

## When Do You Need a Manual Task Risk Assessment (Australia)?

## When Do You Need a Manual Task Risk Assessment in Australia?

A Manual Task Risk Assessment must be conducted in the following circumstances:

**Identifying Hazardous Manual Tasks**

Under regulation 61 of the Work Health and Safety Regulation 2017 (Cth), the PCBU must identify all hazardous manual tasks performed by workers. This requires a proactive, systematic review of all work activities to determine which tasks involve the risk factors defined in regulation 60. The initial identification should be conducted as a baseline assessment for all existing work activities, and then updated whenever new tasks, processes, or equipment are introduced.

**When a Musculoskeletal Injury or Near Miss Occurs**

If a worker sustains a musculoskeletal injury, reports musculoskeletal pain or discomfort related to a work task, or a near-miss incident occurs, the PCBU must review the risk assessment for the relevant task. Under regulation 65 of the WHS Regulation, the PCBU must review and revise risk control measures when there is evidence that the controls are not effective or when a MSD has occurred.

**Introduction of New Tasks or Processes**

Whenever a new work task, process, or work method is introduced that involves manual handling — including new production lines, warehouse operations, patient handling procedures, or delivery processes — a risk assessment must be completed before workers commence the task.

**Changes to Existing Tasks**

A review is required when there are changes to the loads being handled (heavier, larger, or less stable objects), the work environment (new layout, flooring, or temperature conditions), the equipment used, the frequency or duration of the task, or the workers performing the task (new or less experienced workers may face higher risk).

**New Workplace or Workstation Design**

When designing or redesigning workstations, production areas, warehouses, or any work environment where manual tasks will be performed, a risk assessment should inform the design process. Engineering controls incorporated at the design stage — such as height-adjustable workbenches, mechanical lifting aids, and conveyor systems — are the most effective way to eliminate or minimise manual task risks.

**Worker Consultation and Complaints**

Under section 47 of the WHS Act, the PCBU must consult with workers on WHS matters that affect them. If workers raise concerns about the physical demands of a task, report pain or discomfort, or request a review through their health and safety representative, the PCBU should conduct or review the manual task risk assessment.

**Periodic Review**

established standards is to review all manual task risk assessments at least annually, even if no specific trigger event has occurred. This confirms that controls remain effective, no new risk factors have emerged, and the assessment reflects the current work environment and practices.

## What to Include in Your Manual Task Risk Assessment (Australia)

## Key Elements of an Australian Manual Task Risk Assessment

A thorough Manual Task Risk Assessment compliant with the WHS Regulation 2017 (Cth) and the Safe Work Australia Code of Practice should include:

**1. Task Identification**

- Name and description of the specific work task being assessed
- Department, work area, or site where the task is performed
- Frequency and duration of the task (how often and for how long)
- Number of workers who perform the task
- Any tools, equipment, or objects involved in the task

**2. Risk Factor Identification**

Assessment of each of the five biomechanical risk factors identified in the Safe Work Australia Code of Practice:

- **Forceful exertions**: Weight of objects lifted, force required to push/pull, grip force required. Specify loads in kilograms and note any awkward grip requirements
- **Repetitive movements**: Whether the task involves performing the same or similar movements repeatedly. Note the cycle time and number of repetitions per shift
- **Sustained or awkward postures**: Whether the task requires bending, twisting, reaching above shoulder height, working below knee height, kneeling, squatting, or maintaining any fixed posture for extended periods
- **Vibration**: Whether the task involves exposure to whole-body vibration (from vehicles, forklifts, or platforms) or hand-arm vibration (from power tools, grinders, or drills)
- **Object characteristics**: Whether the objects handled are heavy, bulky, unstable, difficult to grip, hot or cold, sharp-edged, or require the worker to adopt awkward postures to handle them

**3. Existing Control Measures**

- Description of the controls currently in place to manage the risk
- Assessment of whether current controls are effective at reducing the risk to an acceptable level
- Identification of any gaps or deficiencies in current controls

**4. Risk Rating**

- Assessment of the overall risk level using a risk matrix (likelihood x consequence)
- Risk categories: Low, Moderate, High, or Extreme
- The risk rating determines the priority and urgency of additional control measures

**5. Injury History**

- Record of any previous musculoskeletal injuries, complaints, or near-miss reports associated with the task
- Workers' compensation claims data for related injuries
- This history provides evidence of the real-world risk level and helps prioritise control measures

**6. Control Measures (Hierarchy of Controls)**

Recommended additional measures to reduce the risk, structured according to the hierarchy of controls:

- **Elimination**: Can the manual handling component be eliminated entirely? (e.g., automated conveyor, mechanical handling system)
- **Substitution**: Can lighter materials, smaller containers, or pre-positioned loads be used?
- **Engineering controls**: Mechanical aids (hoists, trolleys, pallet jacks, forklifts), height-adjustable workstations, conveyor systems, turntables, vacuum lifters
- **Administrative controls**: Job rotation, task scheduling to limit exposure duration, safe work procedures, rest breaks, team lifting protocols, health monitoring
- **Personal protective equipment**: Anti-vibration gloves, supportive footwear, knee pads (as supplementary measures only)

**7. Action Plan**

- Specific actions to implement each recommended control measure
- Responsible person for each action
- Target completion date
- Estimated cost (where relevant for budgeting purposes)
- Priority ranking based on risk level

**8. Worker Consultation Record**

- Record that workers who perform the task were consulted during the risk assessment process, as required under section 47 of the WHS Act
- Names and roles of workers consulted
- Summary of workers' input regarding the physical demands and risk factors of the task

**9. Assessor and Approver Sign-Off**

- Name, qualifications, and signature of the person who conducted the assessment
- Name, title, and signature of the approving manager or WHS officer
- Date of assessment
- Scheduled review date

Under the Fair Work Act 2009 (Cth), the Fair Work Commission (FWC) adjudicates workplace disputes. Section 394 of the Fair Work Act 2009 governs unfair dismissal claims. The Fair Work Ombudsman (FWO) enforces compliance with the National Employment Standards (NES). The Privacy Act 1988 (Cth) and Australian Privacy Principles (APPs) govern personal data handling. The Australian Taxation Office (ATO) administers PAYG withholding and superannuation guarantee obligations under the Superannuation Guarantee (Administration) Act 1992. The Manual Task Risk Assessment (Australia) template covers the mandatory elements under Fair Work Act 2009 (Cth).

## Sources & Citations

- [Fair Work Act 2009 (Cth)](https://www.legislation.gov.au/)

## Frequently Asked Questions

### What is a 'hazardous manual task' under Australian WHS law?

Under reg 60 of the Work Health and Safety Regulation 2017 (Cth), a 'hazardous manual task' means a task that requires a person to use force exerted by a person, repetitive or sustained force, high or sudden force, repetitive movement, sustained or awkward posture, or exposure to vibration. The definition is intentionally broad and covers a wide range of everyday work activities including lifting, carrying, pushing, pulling, holding, and restraining. A task does not need to involve heavy weights to be hazardous — repetitive low-force actions and awkward postures can also cause musculoskeletal disorders over time. Under Australia law, Fair Work Act 2009 (Cth), parties should seek independent legal advice from a qualified lawyer to confirm compliance with all applicable requirements. Under the Fair Work Act 2009 (Cth), the Fair Work Commission (FWC) adjudicates workplace disputes. Section 394 of the Fair Work Act 2009 governs unfair dismissal claims.

### What does the WHS Regulation 2017 require a PCBU to do about hazardous manual tasks?

Under regs 61–65 of the Work Health and Safety Regulation 2017 (Cth), the PCBU must: (1) identify all hazardous manual tasks performed by workers (reg 61); (2) if the task involves a risk of musculoskeletal disorder, eliminate that risk if reasonably practicable, and if not, minimise it using the hierarchy of controls (reg 62); (3) maintain any implemented control measures (reg 63); (4) require that information, training, and instruction is provided to workers about the hazards and risks and safe ways to perform the task (reg 64); and (5) review and revise risk control measures whenever there is indication that controls may not be effective, or when there is a change to the task or working environment that may affect the risk (reg 65). Under Australia law, Fair Work Act 2009 (Cth), parties should seek independent legal advice from a qualified lawyer to confirm compliance with all applicable requirements. Under the Fair Work Act 2009 (Cth), the Fair Work Commission (FWC) adjudicates workplace disputes. Section 394 of the Fair Work Act 2009 governs unfair dismissal claims.

### What is the Safe Work Australia Code of Practice for Hazardous Manual Tasks?

The Safe Work Australia Code of Practice: Hazardous Manual Tasks is a code approved under s 274 of the Work Health and Safety Act 2011 (Cth). It provides practical guidance on how to comply with the hazardous manual tasks provisions in regs 60–68 of the WHS Regulation 2017 (Cth). The Code identifies the five key biomechanical risk factors for musculoskeletal disorder — forces, repetition, posture, vibration, and the physical characteristics of objects — and provides detailed guidance on how to identify and assess each risk factor, select appropriate control measures, consult with workers, and document the assessment process. Following the Code is the most straightforward way to demonstrate compliance with the WHS Act and Regulation. Under Australia law, Fair Work Act 2009 (Cth), parties should seek independent legal advice from a qualified lawyer to confirm compliance with all applicable requirements. Under the Fair Work Act 2009 (Cth), the Fair Work Commission (FWC) adjudicates workplace disputes. Section 394 of the Fair Work Act 2009 governs unfair dismissal claims.

### What are the most effective controls for hazardous manual tasks?

The most effective controls for hazardous manual tasks, in order of priority from the hierarchy of controls in the WHS Regulation 2017 (Cth), are: (1) elimination — redesigning the task or process to remove the need for manual handling entirely (e.g., mechanisation, automated handling systems); (2) substitution or engineering controls — providing mechanical aids such as forklifts, pallet jacks, hoists, conveyor belts, height-adjustable workstations, or team-lift procedures to reduce the force required; (3) administrative controls — implementing job rotation to limit exposure time, safe work procedures, limits on load weights, mandatory rest breaks, training in manual handling techniques, and health monitoring programs; and (4) personal protective equipment — safety footwear and grip gloves as supplementary measures only. Research consistently shows that engineering controls are far more effective at preventing musculoskeletal injuries than training in lifting technique alone.

### How often should a Manual Task Risk Assessment be reviewed in Australia?

Under reg 65 of the Work Health and Safety Regulation 2017 (Cth), the PCBU must review and, if necessary, revise risk control measures for hazardous manual tasks whenever: a control measure does not control the risk so far as is reasonably practicable; a musculoskeletal disorder or near miss associated with the task occurs; a health and safety representative requests a review; or there is a change to the task (e.g., a change in loads, equipment, frequency, working environment, or the workers performing the task). established standards is to review manual task risk assessments at least annually, even if none of the above triggers have occurred, to ensure controls remain effective and no new risk factors have emerged. Under Australia law, Fair Work Act 2009 (Cth), parties should seek independent legal advice from a qualified lawyer to confirm compliance with all applicable requirements. Under the Fair Work Act 2009 (Cth), the Fair Work Commission (FWC) adjudicates workplace disputes. Section 394 of the Fair Work Act 2009 governs unfair dismissal claims.

Fillable version (PDF or Word): [Download the free template](https://forms-legal.com/australia/employment/health-safety/au-manual-handling-assessment)

General information, not legal advice — see our [accuracy & editorial policy](https://forms-legal.com/accuracy-policy). Confirm the cited law is current before relying on it.
