---
title: "Subcontractor Agreement (Australia)"
url: "https://forms-legal.com/australia/business/contracts/subcontractor-agreement-australia"
description: "A Subcontractor Agreement in Australia engages an independent contractor to deliver defined work and records the scope, fees, intellectual-property ownership, and confidentiality terms, with the contractor's status distinguished from employment under the Building and Construction Industry Security of Payment Act 1999"
language: "en"
jurisdiction: "Australia"
category: "Business / Contracts & Agreements"
primaryStatute: "Building and Construction Industry Security of Payment Act 1999 (NSW) and equivalent state and territory legislation"
dateModified: "2026-11-01"
maintainer: "Vladislav Sergienko, founder (not a lawyer)"
---

# Subcontractor Agreement (Australia)

- Australia · Business / Contracts & Agreements
- Legal basis: Building and Construction Industry Security of Payment Act 1999 (NSW) and equivalent state and territory legislation

## What Is a Subcontractor Agreement (Australia)?

A Subcontractor Agreement in Australia engages an independent contractor to deliver defined work and records the scope, fees, intellectual-property ownership, and confidentiality terms, with the contractor's status distinguished from employment under the Building and Construction Industry Security of Payment Act 1999 (NSW).

Subcontractor agreements in Australia operate within a complex regulatory environment that is unique to the building and construction industry. Unlike general commercial service agreements, construction subcontracts in Australia are subject to the Building and Construction Industry Security of Payment Acts (SOP Acts) — separate legislation in each state and territory — which provide subcontractors with statutory rights to progress payments that cannot be contracted out of. Pay-when-paid and pay-if-paid clauses, common in other jurisdictions, are void under Australian SOP legislation.

The applicable SOP Act depends on the state or territory in which the construction work is performed. New South Wales operates under the Building and Construction Industry Security of Payment Act 1999 (NSW). Queensland's legislation is the Building Industry Fairness (Security of Payment) Act 2017 (QLD). Victoria has the Building and Construction Industry Security of Payment Act 2002 (VIC). Western Australia, South Australia, Tasmania, the ACT, and the Northern Territory each have their own equivalent legislation. In March 2025, the Commonwealth Government released its response to the Murray Review, signalling support for a nationally aligned SOP regime.

A well-drafted Australian subcontractor agreement addresses scope of work, program, contract sum and progress payments, the subcontractor's rights under the SOP Act, retention, defects liability, variations, liquidated damages for delay, insurance, work health and safety obligations, and dispute resolution.

The legal framework governing the Subcontractor Agreement (Australia) in Australia draws on several key statutes and regulatory bodies. Under the Corporations Act 2001 (Cth), the Australian Securities and Investments Commission (ASIC) regulates companies and financial services. Section 127 of the Corporations Act 2001 governs company execution of documents. The Australian Competition and Consumer Commission (ACCC) enforces the Competition and Consumer Act 2010 (Cth). The Australian Taxation Office (ATO) administers the Goods and Services Tax under the A New Tax System (Goods and Services Tax) Act 1999. The Federal Court of Australia and Supreme Courts of each state have jurisdiction over corporate disputes. Parties executing a Subcontractor Agreement (Australia) in Australia should confirm the document reflects current law, including any amendments enacted since the original drafting date. The Building and Construction Industry Security of Payment Act 1999 (NSW) set the foundational requirements.

## When Do You Need a Subcontractor Agreement (Australia)?

A Subcontractor Agreement is essential whenever a head contractor engages a subcontractor to perform construction work in Australia. Without a written subcontract, the parties' rights and obligations — particularly regarding payment, variations, defects, and delay — are governed by poorly defined implied terms and the sometimes-complex default provisions of the applicable SOP Act and general law.

A subcontractor agreement is needed for: engaging a trade contractor (electrician, plumber, concretor, tiler, painter, carpenter, etc.) to perform specialist work on a residential or commercial construction project; engaging a specialist consultant or professional to provide design or certification services in connection with a construction project; sub-subcontracting work to a lower-tier contractor; and any construction engagement where work will be performed over a period of time and progress payments will be made.

The agreement protects both parties. For the head contractor, it defines the scope and standard of the subcontract works, establishes the program and liquidated damages for delay, provides mechanisms for variations and defects rectification, and confirms the subcontractor carries the required insurance and holds all necessary licences. For the subcontractor, it documents the agreed contract sum and payment terms, preserves and supplements the subcontractor's statutory rights under the SOP Act, confirms clarity about the scope of works (preventing the head contractor from claiming a disputed item is included in the subcontract), and provides clear grounds for termination if the head contractor fails to pay.

The Australia Subcontractor Agreement (Australia) template is suitable for use across all Australian states and territories, including New South Wales, Victoria, Queensland, Western Australia, South Australia, Tasmania, the Australian Capital Territory, and the Northern Territory.

Parties in Australia should prepare a Subcontractor Agreement (Australia) proactively rather than waiting for a dispute to arise. Under the Corporations Act 2001 (Cth), the Australian Securities and Investments Commission (ASIC) regulates companies and financial services. Section 127 of the Corporations Act 2001 governs company execution of documents. The Australian Competition and Consumer Commission (ACCC) enforces the Competition and Consumer Act 2010 (Cth). The Australian Taxation Office (ATO) administers the Goods and Services Tax under the A New Tax System (Goods and Services Tax) Act 1999. The Federal Court of Australia and Supreme Courts of each state have jurisdiction over corporate disputes.

## What to Include in Your Subcontractor Agreement (Australia)

A well-drafted Australian Subcontractor Agreement must address several key elements that are specific to the Australian construction law environment.

The scope of works is the foundation of the subcontract. It should describe the subcontract works with precision, referencing approved drawings, specifications, and schedules where applicable. An ambiguous scope of works is the most common cause of payment disputes in the construction industry.

Security of payment provisions must be addressed even where the contract is silent, because the SOP Acts apply to all construction contracts as a matter of law. A well-drafted agreement should acknowledge the subcontractor's statutory rights under the applicable SOP Act, specify reference dates for payment claims, and confirm that pay-when-paid provisions are void. Any provision that purports to reduce, restrict, or exclude the subcontractor's rights under the SOP Act is void to the extent of the inconsistency.

Retention provisions should specify the retention percentage, the maximum amount of retention, and the conditions for release. Where retention trust legislation applies (currently in NSW and QLD above threshold values), the agreement should acknowledge the obligation to hold retention in trust.

Insurance requirements are critical. The agreement must specify the types and minimum amounts of insurance required, and should require the subcontractor to provide certificates of currency before commencing work.

Work health and safety obligations reflect the concurrent PCBU duties of both the head contractor and the subcontractor under the WHS Acts. The agreement should specify both parties' WHS responsibilities, including the subcontractor's obligation to comply with the site safety management plan and Safe Work Method Statements for high-risk construction work.

Variation procedures must be clearly documented. Verbal variations are a common source of dispute. The agreement should require written variation instructions before any varied work commences and specify how variations will be valued.

Additional compliance elements for a Subcontractor Agreement (Australia) used in Australia include: Under the Corporations Act 2001 (Cth), the Australian Securities and Investments Commission (ASIC) regulates companies and financial services. Section 127 of the Corporations Act 2001 governs company execution of documents. The Australian Competition and Consumer Commission (ACCC) enforces the Competition and Consumer Act 2010 (Cth). The Australian Taxation Office (ATO) administers the Goods and Services Tax under the A New Tax System (Goods and Services Tax) Act 1999. The Federal Court of Australia and Supreme Courts of each state have jurisdiction over corporate disputes.

## Sources & Citations

- [Building and Construction Industry Security of Payment Act 1999](https://www.legislation.gov.au/)

## Frequently Asked Questions

### What is the Security of Payment Act and how does it protect subcontractors in Australia?

The Building and Construction Industry Security of Payment Acts (SOP Acts) are state and territory legislation designed to require that contractors and subcontractors can recover progress payments for construction work. Every Australian state and territory has its own version of the legislation. The Acts create a statutory right to progress payments at the end of each reference date regardless of any contractual arrangement that might otherwise delay or prevent payment. Crucially, pay-when-paid and pay-if-paid clauses — which would make payment to a subcontractor conditional on the head contractor being paid — are void under the SOP Acts. If a head contractor disputes a payment claim, they must issue a payment schedule within the statutory timeframe; failure to do so means the full claimed amount becomes immediately payable. Subcontractors can refer disputed amounts to a rapid adjudication process — typically resolved within 10 to 15 business days — avoiding expensive litigation. The Commonwealth Government released the Murray Review response in March 2025, indicating support for greater national alignment of SOP legislation across jurisdictions.

### What insurance must a subcontractor hold in Australia?

Subcontractors in the Australian building and construction industry are generally required to hold: (1) public liability insurance, typically with a minimum of $10 million per occurrence, to cover third-party personal injury and property damage claims; (2) workers' compensation insurance as required by the laws of the relevant state or territory for all employees and deemed workers; and (3) any other insurance required by the principal contract or by law, such as plant and equipment insurance or contract works insurance. Professional subcontractors (such as engineers, architects, or building certifiers) may also be required to hold professional indemnity insurance. Licence conditions in some states and territories (such as the QBCC in Queensland or NSW Fair Trading) may specify minimum insurance requirements as a condition of holding a contractor licence.

### What is a retention in a construction subcontract?

Retention is a percentage of progress payments (typically 5% to 10%) that the head contractor withholds from the subcontractor during the course of the works as security for the subcontractor's performance and defects rectification obligations. Half of the retention is typically released on practical completion of the subcontract works and the remaining half is released at the end of the defects liability period, provided all defects have been rectified. Some states and territories have enacted retention trust legislation to require head contractors to hold retention monies in trust for the benefit of subcontractors. In New South Wales, the Building and Construction Industry Security of Payment Amendment Act 2018 introduced retention trust requirements for contracts above a threshold value. Queensland has similar provisions under the Building Industry Fairness (Security of Payment) Act 2017.

### How does a subcontractor serve a valid payment claim in Australia?

Under the Security of Payment Acts, a subcontractor serves a payment claim on the head contractor at the end of a reference date (which may be a date specified in the contract or the last day of each month). The payment claim must: (1) identify the construction work or related goods and services to which it relates; (2) indicate the amount of the progress payment claimed; and (3) in most jurisdictions, be endorsed as a payment claim made under the applicable Act. The head contractor must respond with a payment schedule within the statutory timeframe — for example, 15 business days in NSW or 15 business days in QLD — or within any shorter time specified in the contract, if shorter. Failure to provide a payment schedule can result in the head contractor becoming liable for the full amount claimed and losing the right to dispute the payment in adjudication.

### What WHS duties apply to subcontractors under Australian law?

Under the Work Health and Safety Act 2011 (Cth) and equivalent state and territory WHS legislation (adopted by NSW, QLD, SA, TAS, ACT, NT and, from 2024, WA), both the head contractor and the subcontractor are Persons Conducting a Business or Undertaking (PCBUs) with concurrent primary duties of care to requires the health and safety of workers and other persons so far as is reasonably practicable. The head contractor, as the principal PCBU on the construction site, bears significant WHS management responsibilities. The subcontractor must comply with the WHS Act, the site safety management plan, Safe Work Method Statements (SWMS) required for high-risk construction work, and any reasonable WHS directions from the head contractor. In Victoria, which operates under the Occupational Health and Safety Act 2004 (Vic), similar duties apply. Failure to comply with WHS duties can result in substantial fines and, in cases of gross negligence causing death, criminal prosecution.

Fillable version (PDF or Word): [Download the free template](https://forms-legal.com/australia/business/contracts/subcontractor-agreement-australia)

General information, not legal advice — see our [accuracy & editorial policy](https://forms-legal.com/accuracy-policy). Confirm the cited law is current before relying on it.
