---
title: "Demolition Contract (Australia)"
url: "https://forms-legal.com/australia/business/construction/demolition-contract-australia"
description: "A Demolition Contract in Australia sets the scope of works, price, timeframe, and variation and completion procedures between the principal and the builder or contractor under the Work Health and Safety Act 2011 (NSW)."
language: "en"
jurisdiction: "Australia"
category: "Business / Construction"
primaryStatute: "Work Health and Safety Act 2011 (NSW) and equivalent state and territory work health and safety legislation"
dateModified: "2026-11-01"
maintainer: "Vladislav Sergienko, founder (not a lawyer)"
---

# Demolition Contract (Australia)

- Australia · Business / Construction
- Legal basis: Work Health and Safety Act 2011 (NSW) and equivalent state and territory work health and safety legislation

## What Is a Demolition Contract (Australia)?

A Demolition Contract in Australia sets the scope of works, price, timeframe, and variation and completion procedures between the principal and the builder or contractor under the Work Health and Safety Act 2011 (NSW).

Demolition work in Australia is subject to extensive regulatory requirements. The Work Health and Safety (WHS) Act and Regulations — which apply in the Commonwealth, NSW, QLD, SA, TAS, ACT, and NT (with similar legislation in VIC and WA) — impose detailed obligations on persons conducting demolition work, including obligations in relation to hazardous work, asbestos removal, falling objects, and structural instability. High risk demolition work requires a High Risk Work Licence under the WHS Regulations.

Asbestos is present in many buildings constructed in Australia before 1 January 2004 (when the importation and use of asbestos-containing products was banned). The Work Health and Safety Regulations require that an asbestos register and asbestos management plan be maintained for any workplace where asbestos is present, and that asbestos-containing materials be removed by a licensed asbestos removalist before or during demolition. Asbestos cement sheeting (fibro) and asbestos insulation are commonly found in older Australian buildings.

State and territory building legislation also regulates demolition work. Building permits or demolition permits are required in most jurisdictions for demolition of load-bearing structures, and the contract must address compliance with these permit requirements.

The Building and Construction Industry Security of Payment Act (SOPA) applies to demolition contracts, giving demolition contractors the right to serve payment claims and to have disputed claims adjudicated rapidly.

The legal framework governing the Demolition Contract (Australia) in Australia draws on several key statutes and regulatory bodies. Under the Corporations Act 2001 (Cth), the Australian Securities and Investments Commission (ASIC) regulates companies and financial services. Section 127 of the Corporations Act 2001 governs company execution of documents. The Australian Competition and Consumer Commission (ACCC) enforces the Competition and Consumer Act 2010 (Cth). The Australian Taxation Office (ATO) administers the Goods and Services Tax under the A New Tax System (Goods and Services Tax) Act 1999. The Federal Court of Australia and Supreme Courts of each state have jurisdiction over corporate disputes. Parties executing a Demolition Contract (Australia) in Australia should confirm the document reflects current law, including any amendments enacted since the original drafting date. The Work Health and Safety Act 2011 (NSW) set the foundational requirements.

## When Do You Need a Demolition Contract (Australia)?

A Demolition Contract is needed in Australia whenever a property owner or developer engages a professional demolition contractor to demolish or partially demolish a structure on their property. A written contract is essential to manage the significant safety, environmental, and financial risks associated with demolition work.

For full site demolition — such as the demolition of an existing house or commercial building to clear a site for redevelopment — a demolition contract should be entered into before any work commences. The contract should address the asbestos survey results, the methodology for demolition, the waste disposal arrangements, and the timeframe for clearing and levelling the site.

For partial demolition — such as the removal of an internal wall, the demolition of a rear extension, or the selective dismantling of specific structural elements — the contract should be clear about what is being demolished and what is being retained. Structural assessments may be required before partial demolition commences.

For construction projects where demolition is one of the first stages of a larger build, the demolition contract may be a subcontract under the main construction contract, and the demolition contractor's obligations should be coordinated with those of the head contractor and other subcontractors.

Demolition of heritage-listed structures requires special approvals from state heritage authorities (such as the NSW Heritage Council or Heritage Victoria), and the demolition contract should address the requirements of any heritage approvals and the obligations in relation to salvage and recording of heritage fabric.

Parties in Australia should prepare a Demolition Contract (Australia) proactively rather than waiting for a dispute to arise. Under the Corporations Act 2001 (Cth), the Australian Securities and Investments Commission (ASIC) regulates companies and financial services. Section 127 of the Corporations Act 2001 governs company execution of documents. The Australian Competition and Consumer Commission (ACCC) enforces the Competition and Consumer Act 2010 (Cth). The Australian Taxation Office (ATO) administers the Goods and Services Tax under the A New Tax System (Goods and Services Tax) Act 1999. The Federal Court of Australia and Supreme Courts of each state have jurisdiction over corporate disputes.

## What to Include in Your Demolition Contract (Australia)

A thorough Australian Demolition Contract should include the following key provisions.

Party Details — Identify the contractor by full legal name, ABN, ACN, contractor licence number, and demolition licence number. Identify the principal by full legal name and ABN.

Site Details — Specify the address and legal description of the site, and describe the structure or structures to be demolished.

Scope of Works — Define the demolition scope precisely: full demolition, partial demolition, or selective dismantling. Identify which structures or elements are to be demolished and which are to be retained.

Asbestos and Hazardous Materials — Require an asbestos survey before commencement, specify whether the contractor or the owner arranges the survey, identify the asbestos removal scope (if any), and require compliance with the WHS Regulations for asbestos removal.

Permits and Approvals — Specify who is responsible for obtaining demolition permits, building permits, environmental approvals, and utility disconnection authorisations.

Waste Disposal — Specify the contractor's obligations for waste classification, separation, and disposal at licensed waste facilities, consistent with the applicable state EPA requirements.

Salvage — Address ownership of salvaged materials and any right of the contractor to retain specific materials as part of the contract consideration.

Contract Price and Payment — Specify the contract price (lump sum or schedule of rates), the progress payment schedule, the retention percentage, and the SOPA payment claim procedure.

Safety — Require the contractor to maintain a Safe Work Method Statement (SWMS) for all high risk construction work, to comply with WHS legislation, and to hold all required WHS licences.

Defects Liability — Specify the defects liability period and the contractor's obligation to rectify any defects in the demolition works (such as failure to remove all structural elements) within that period.

Additional compliance elements for a Demolition Contract (Australia) used in Australia include: Under the Corporations Act 2001 (Cth), the Australian Securities and Investments Commission (ASIC) regulates companies and financial services. Section 127 of the Corporations Act 2001 governs company execution of documents. The Australian Competition and Consumer Commission (ACCC) enforces the Competition and Consumer Act 2010 (Cth). The Australian Taxation Office (ATO) administers the Goods and Services Tax under the A New Tax System (Goods and Services Tax) Act 1999. The Federal Court of Australia and Supreme Courts of each state have jurisdiction over corporate disputes.

## Sources & Citations

- [Work Health and Safety Act 2011](https://www.legislation.gov.au/)

## Frequently Asked Questions

### What licences are required for demolition work in Australia?

Demolition work in Australia is regulated at the state and territory level, and licensing requirements vary by jurisdiction and by the type and value of demolition work. In New South Wales, demolition work above the prescribed threshold requires a demolition contractor licence under the Home Building Act 1989 (NSW) or, for commercial demolition, compliance with Work Health and Safety Act 2011 (NSW) requirements for high risk work licences, including a High Risk Work Licence for demolition of load-bearing structures. In Victoria, demolition involving the removal of structural elements requires a demolition licence under the Building Act 1993 (VIC). In Queensland, demolition work requires a builder-subdivisional contractor licence under the Queensland Building and Construction Commission Act 1991 (QLD). All demolition contractors in Australia must comply with the Work Health and Safety (WHS) legislation applicable in their state or territory, particularly the WHS Regulations governing hazardous work and asbestos removal.

### What are the asbestos requirements for demolition work in Australia?

Asbestos management is one of the most important regulatory requirements in Australian demolition work. Before any demolition or refurbishment of a building constructed before 1 January 2004 (when asbestos products were banned in Australia), an asbestos survey must be carried out to identify the presence, location, condition, and quantity of asbestos-containing materials (ACMs). Under the Work Health and Safety Regulations applicable in each state and territory (which mirror the Model WHS Regulations), the person conducting the demolition must obtain an asbestos register and management plan for the site. The removal of ACMs must be performed by a licensed asbestos removalist — a Class A licence is required for the removal of friable asbestos (loose asbestos fibres), and a Class B licence is required for the removal of non-friable (bonded) asbestos. Improper handling of asbestos can result in significant WHS penalties and civil liability. The demolition contract should clearly address asbestos survey and removal obligations.

### Who is responsible for obtaining demolition permits in Australia?

The responsibility for obtaining demolition permits depends on the terms of the contract. Under most Australian standard form construction and demolition contracts, it is the contractor's responsibility to obtain all required consents, approvals, and permits for the demolition work. These include: (1) a demolition permit or building permit issued by the relevant local council or private certifier; (2) environmental protection permits if the demolition will generate hazardous waste; (3) approval from utility companies for the disconnection of services (gas, water, electricity, telecommunications) before demolition commences; and (4) Work Health and Safety notifications required under state WHS legislation for notifiable demolition work. Some demolition contracts allocate responsibility for council approval to the principal (owner) and responsibility for WHS compliance and operational permits to the contractor. The contract should clearly specify which party is responsible for each category of approval.

### What happens to salvaged materials from a demolition in Australia?

Under Australian law, the owner of the land generally owns all materials in buildings on that land. Salvaged materials from demolition — including timber, brickwork, roofing materials, fixtures, and fittings — belong to the owner unless the contract provides otherwise. Many demolition contracts provide that the demolition contractor may retain certain salvaged materials (such as scrap metal, bricks, or timber) as part of the consideration for the demolition work, which can reduce the contract price. The contract should clearly specify which materials the contractor may retain, which materials are to be returned to the owner, and which materials are to be disposed of at the contractor's cost. Waste disposal must comply with the applicable state environmental protection legislation and EPA requirements. Some materials — including asbestos, contaminated soil, and hazardous chemicals — must be disposed of at licensed waste facilities, and the cost of disposal should be addressed in the contract.

### Do I need a lawyer to create a Demolition Contract (Australia) in Australia?

A Demolition Contract (Australia) does not legally require a lawyer in Australia, and individuals and businesses may draft and execute the document independently. The Work Health and Safety Act 2011 (NSW) do not mandate legal representation for the creation or signing of this type of document. However, seeking independent legal advice from a qualified Australia lawyer is recommended for transactions involving substantial financial value, complex regulatory requirements, or cross-border elements where multiple legal jurisdictions may apply. A lawyer can verify that the document complies with all applicable statutory requirements, identify potential risks specific to the transaction, and confirm that the terms adequately protect the interests of all parties involved. Disputes arising from this type of document are generally heard by the courts of the relevant state or territory, while the Federal Court of Australia hears matters arising under Commonwealth laws such as the Corporations Act 2001 (Cth) and the Australian Consumer Law, and Australian Securities and Investments Commission (ASIC) may impose additional compliance obligations depending on the nature of the underlying transaction. Professional legal review is particularly advisable where the document will be submitted to government agencies or used as evidence in legal proceedings.

Fillable version (PDF or Word): [Download the free template](https://forms-legal.com/australia/business/construction/demolition-contract-australia)

General information, not legal advice — see our [accuracy & editorial policy](https://forms-legal.com/accuracy-policy). Confirm the cited law is current before relying on it.
